Jump to content
SAU Community

gtst front bar

FATAZZ

By FATAZZ,
in Exterior & Interior Styling

 Share

Recommended Posts

Mr_G Mentor

Mr_G

Posted
Posted
has anyone fitted a FMIC behind the standard front bar on a r32gtst with the motorized spoiler that drops,it doesnt look like there would be much room?

is it possible?

if its not,its 4 sale n make n offer

Syd only

We fitted up a Front mount to my mates 32 over the weekend. Basically he bought the gtr bar, but we had to remove the motors, and the front spoiler for the cooler to go in...

Link to comment
https://www.sau.com.au/forums/topic/71343-gtst-front-bar/#findComment-1316371
Share on other sites
Mr_G Mentor

Mr_G

Posted
Posted

I think the front bar he bought was designed for a gtst, but in GTR style. He fitted up one of those 600x300x76 cores (Hybrid) with no problems.

If your interested, im pretty sure I saw a GTR bar for GTST down @ Justjap the other day, newly sprayed for $450 or so....

Give just jap a call if your interested

Link to comment
https://www.sau.com.au/forums/topic/71343-gtst-front-bar/#findComment-1316850
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...