Jump to content
SAU Community

Recommended Posts

Hi

I'm in the process of taking my car over the pit next week, but I'm missing a spare tyre in the boot. Does any one know if it's compulsory to have a spare tyre in order to pass the pit inspection ??

Better yet, does anyone have a standard spare rim/tyre floating around that they no longer need :D ??

Also, anyone here FAILED a pit inspection ?? What the reason for the FAILED inspection ?? The reason I'm asking is that the exhaust on my car is rather noisy, and I'm a bit concerned that they might fail the inspection.

Anyway, a few more sleeps and they'll be another Skyline on the street ;)

Bye

Richard.

Link to comment
https://www.sau.com.au/forums/topic/7136-help-pit-inspection/
Share on other sites

They didn't check mine for a spare tyre, but I may have been lucky.

You can Borrow my spare tyre if ya want to be safe.

I failed the pits because my tint was slightly to dark, air filter was a bit wobly, and indicatrors were tinted black.

You should be right with the exaust unless they flog it when they take it for a test drive. My exaust passed, and you can ask around, my exaust is pretty damn loud.

Simplelogik,

I would definately borrow a spare, you can have mine if need be, as they may look and will fail it without one. They don't believe you when you say "I'll go buy one straight away". The exhaust will most likely be checked, I think it needs to be less than 87db at a meter or some such bullshit, but it should be alright. You can always fit a silencer in the end before you take it.

Good luck with adding another Skyline on our roads.

See'ya:burnout:

You should borrow a spare wheel as its required for compliance and its other stupid things they pick on.

They failed mine first time up due to a crack in the exhaust just before the muffler (couldn't hear it but they found it) and they wanted some a/m fog lights completely removed - its not as if they were actually connected or working, mind you but they wanted them removed (we just tucked them under the front bumper in the end).

Apparently (and I don't know how true this is) but if you do fail then they can only re-check what you failed the first time to see if its fixed. They can't fail you again for other reasons.

Al

Originally posted by GTS-t VSPEC

Simplelogik,

I would definately borrow a spare, you can have mine if need be, as they may look and will fail it without one. They don't believe you when you say "I'll go buy one straight away". The exhaust will most likely be checked, I think it needs to be less than 87db at a meter or some such bullshit, but it should be alright. You can always fit a silencer in the end before you take it.

Good luck with adding another Skyline on our roads.

See'ya:burnout:

A silencer :D ??? Not sure what's the size of my exhaust, but it's nearly as big as the rear lights, and it's way too loud for my liking. I've put in an amp and 12" sub and still could hardly hear it unless I turn it right up so that I can see my read window vibrate ..

simplelogik,

Yeah it goes into your exhaust tip and muffles the sound coming out, it also heavily restrict you exhaust airflow so I'd recommend taking it off once its complied. I have one for a 4" tip (I think), all you need is the small hole in your exhaust tip where the bolt goes through, most Jap system have them. You can borrow it if you want.

See'ya:burnout:

i failed the pits first time for alot of stupid things;

horn didnt work

park lights didnt work

steering rack boot cracked

too low

too loud

blow off valve

pod filter

external wastegate

cracked carbon canister

2-3 vacuum leaks

not good! took me about 3 weeks to get everything done. hint: go to east perth, theyre easy

Originally posted by adam 32

i failed the pits first time for alot of stupid things;

horn didnt work

park lights didnt work

steering rack boot cracked

too low

too loud

blow off valve

pod filter

external wastegate

cracked carbon canister

2-3 vacuum leaks

not good! took me about 3 weeks to get everything done. hint: go to east perth, theyre easy

Hi Adam,

Where did you failed ??? East Perth would be good as it's only around the corner from work.

Bye

Richard

Originally posted by simplelogik

Does any one know if it's compulsory to have a spare tyre in order to pass the pit inspection ??  

Last time I went over the pits, I specifically asked them if I needed to carry a spare tyre and the inspector told me quite bluntly that they couldn't care less. "A spare tyre is only there for your convenience", he said.

So no need to worry about that :P

Originally posted by simplelogik

Where did you failed ??? East Perth would be good as it's only around the corner from work.

IIRC Adam, you failed at Welshpool right ?

East perth is props! They're easy... I've only heard one bad story out of 10 for east perth.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
    • I can donate $100 to your upgrade fund. So long as you can donate the IC7 my way....
    • I'd love a Haltech ECU, and Haltech 10 dash. Was having a chat with Rob and Andy @ Haltech when Rob put one in his MR2. First one I'm kind of interested in too, as you can dim it RIGHT down. Andy was saying bright dashes is one of his peeves too!
×
×
  • Create New...