Jump to content
SAU Community

Recommended Posts

Hello All

Mark Nguyen is the name. Moving my import yard onto the internet in the coming months and hoping to deal with the clubs/teams available on the net in regards to Japanese auto parts and cars. We have a variety of Japanese high performance parts & cars available. And I'm happy to give special prices to people on forums. Just wondering what parts most people are interested in on here as I have a variety and don't know what to list first. I stock a range of Nissan Skyline R32, R33, R34 GTS and GTR Parts as well as Toyota Supra, Soarer, Celica, MR2 and Nissan 180sx, 200sx, 300zx.

Link to comment
https://www.sau.com.au/forums/topic/71694-new-to-sau/
Share on other sites

Hello & welcome Mark.

Depending on what you can get available, anything from performance parts to random accessories would get snapped up all the time. Are you in business now, or have a website etc etc ?

Link to comment
https://www.sau.com.au/forums/topic/71694-new-to-sau/#findComment-1322699
Share on other sites

Yup what dan and Adrian said plus a website of your parts plus prices...

don;t worry about those victorians.... there a crazy bunch :-)

I'm in the process of creating a website etc, been looking for webmasters and designers but so far, very expensive quotes lol. As for victorians, they are crazy indeed. My mate from victoria told me he saw 16 cops today busting Jaywalkers in some sort of operation in the city. Surely there has to be a better way to use police resources LOL

Link to comment
https://www.sau.com.au/forums/topic/71694-new-to-sau/#findComment-1322786
Share on other sites

Hi

what do you mean SAUWA sponsor?  Give me a run down on PM and I May be interested. Thanks.

Mark

Click on the members name, and a menu will pop up. Then click on "send a private message to.........", and there it is. Once someone has sent you one, it is easy to reply to their message. A window should pop up saying when you have a new pm, but if not, when you are logged onto the forums in the top right corner it will say if you have any. This is mine:

Welcome, ossie_21.

You last visited: Today at 07:27 PM

Private Messages: 0 Unread, Total 6

I will send you one now with some questions. :)

Link to comment
https://www.sau.com.au/forums/topic/71694-new-to-sau/#findComment-1322799
Share on other sites

MNImports, g'day and welcome.

For parts, are you talking second hand OEM parts? or just performance parts?

There isnt many places here that do second hand and new OEM and performance parts that I know of over here, like JMS or D1 Garage do in SA.

Something like that would be a welcome addition.

Link to comment
https://www.sau.com.au/forums/topic/71694-new-to-sau/#findComment-1322869
Share on other sites

MNImports, g'day and welcome.

For parts, are you talking second hand OEM parts? or just performance parts?

There isnt many places here that do second hand and new OEM and performance parts that I know of over here, like JMS or D1 Garage do in SA.

Something like that would be a welcome addition.

I'm talking second hand OEM and performance parts. Some of which would have to be ordered though.

Thanks for kind regards.

Mark

Link to comment
https://www.sau.com.au/forums/topic/71694-new-to-sau/#findComment-1322905
Share on other sites

Well, some ideas would be the basic mods, exhaust, suspension, bovs, wheels, injectors, turbos, guages, fuel pumps (GTR/z32), afms - I could go on for ever :)

Second hand OEM engines, gearboxes, interior trim, panels, bumpers, lights, brakes, suspension, ecu, loom etc.

LOL, I got most of those.

I have some 780cc Nismo Injectors on special too if anyone is interested. I'm selling them new for $700 to all SAU members.

I got 2540 HKS Turbos for $1800 but they take 10 days to get delivered.

I got Buddy Club Hyper Golds New for $1500.

I got Blitz Fuel, Water Temp, Boost Gauges.

I got Gearboxes for R33 starting from $1k

I could go on forever too.

Thanks for your help though

Mark

Link to comment
https://www.sau.com.au/forums/topic/71694-new-to-sau/#findComment-1322929
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...