Jump to content
SAU Community

Recommended Posts

Turbo Package suit RB20, RB25, RB30, SR20 & Tough CA18.

Turbo Package Consists Of:

A Percision T04e, (with a T/3 Flange,)

Turbo Bag

40mm Waste Gate,

Braiden lines,

Gaskets, Bolts, Chrome fittings and V-Band fitting

Also includes Hks Pod Filter.

This turbo package is capable of making 300rwkw on only 14 psi. The turbo have steel front and back wheels and are brand new are rated at 550hp. it is also 360 thrust bearing The package comes with all of the necessary fittings to make it an easy fit to any car, there is no manifold included, was bought from this forum and never put on, now selling and using cash for other investment.

PRICE DROP $850 FIRM NEED TO SELL ASAP

PM or call 0400261099

Link to comment
https://www.sau.com.au/forums/topic/71707-full-turbo-kit-for-rb2520/
Share on other sites

I think you have confussed this sale with others going around, cos I do know what turbos you are talking about and I assure you and everyone else that this is not one of them.

I will be reciving the full details on the turbo aswell as all the specs tommrrow and as soon as i do i will be posting it.

This is not the dicussion section and I will not be disscusing "cheap china turbos" in this tread, if you wish to dicuss this any further i suggest you send me a PM or call me on 0400261099, or I will be forced to report you to admin.

I also can supply the number of the person I bought this turbo from who will back me up 100% as when he bought it (two of them) he also had it checked up by a performance shop in brisbane "driftking" i belive, who said they were more then fine, once again, details via PM.

Rs,

****en what is it with you posting this thread all the time if your not intrested dont ****en buy it and dont post!

this is the second thread u have done this too!

Conidering it has a T3 flange, will it bolt directly into the standard R33 low mount turbo manifold? Also, would it need a new FMIC to get about 10-12psi of boost? ...my baby's in deparate need of a new turbo..

It will bolt onto a R33 manifold, The factory cooler should be fine on low boost but it would be better with FMIC,

Open to offers,

Rs,

you know how it has 0.60 Front and 0.84 Rear, which is the one most resonsible for lag ? or are they both equally responsible ? cos i really want to cut down lag as much as possible so i was looking for an A/R of around 0.64 is this right ? it would bolt straight on right ?

you know how it has 0.60 Front and 0.84 Rear, which is the one most resonsible for lag ? or are they both equally responsible ? cos i really want to cut down lag as much as possible so i was looking for an A/R of around 0.64 is this right ? it would bolt straight on right ?

I belive there is not much difference between The rear being 0.64 and 0.84, I have seen a 0.84 on a 4cyl and the car pulls hard all throught the rev range.

Remember big power = lag, it will bolt straight on and if you find the 0.84 to laggy for your likin then you could always take it off and replace the rear housing with a 0.64.

Rs,

a few quick questions roughly how much psi can u run through the turbo.

What brand is the wastegate and how much can it support.

Where are u located.

Has the turbo been used before rebuilt reputable etc.

If i like the answers very interested.

a few quick questions roughly how much psi can u run through the turbo.

What brand is the wastegate and how much can it support.

Where are u located.

Has the turbo been used before rebuilt reputable etc.

If i like the answers very interested.

PM sent

Rs,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
×
×
  • Create New...