Jump to content
SAU Community

Recommended Posts

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

What are these DynoLog chasis dyno like compared to Dyno Dynamics?

Im not suggesting anything, just questioning? ;)

From the results i have seen on these dynos as opposed to dyno dynamics dynos:

1. They read lower then dyno dynamics dynos generally

2. You can't cheat the figures as easily as weather conditions are detected or dowloaded or something (can't remember exactly)

Just watched the video link(thanks R32_GODZILLA !);all I can say is "FAAAAARK!" Congratulations,Dave! Well,I'm off to the toilet;pass the Kleenex,someone? :whackit: !!

From the results i have seen on these dynos as opposed to dyno dynamics dynos:

1. They read lower then dyno dynamics dynos generally

2. You can't cheat the figures as easily as weather conditions are detected or dowloaded or something (can't remember exactly)

It all depends on how a DD dyno is configured as you have to put in your own weather conditions, hence shootout mode is used as a base sometimes. I can't tell you what the dyno at Ice would give as the car almost came off the rollers a couple times before we gave up trying and accepted a figure of 600+

The dyno at MAS takes weather readings 500 times per second during a run and makes the appropriate changes in the configuration to give an accurate reading.

It all depends on how a DD dyno is configured as you have to put in your own weather conditions, hence shootout mode is used as a base sometimes.  I can't tell you what the dyno at Ice would give as the car almost came off the rollers a couple times before we gave up trying and accepted a figure of 600+

The dyno at MAS takes weather readings 500 times per second during a run and makes the appropriate changes in the configuration to give an accurate reading.

What he said^^^^

Have ICE thought about getting different rollers or is it purely because of the power your car is putting down and the torque? Having said that i have seen some cars only making 230rwkw almost climbing out of the rollers due to some crazy lsd's they have been running (they weren't strapped down though).

You know you've got a really tough car when you can't get an accurate dyno reading from it :(

I would guess so. An Rb30/26 S15 in autosalon mag a while back with t51r spl was making a claimed 1600Nm of torque or more. My 33 made over 700nm of torque with a little under 400rwhp so i would believe that it's making this much torque.

What he said^^^^

Have ICE thought about getting different rollers or is it purely because of the power your car is putting down and the torque? Having said that i have seen some cars only making 230rwkw almost climbing out of the rollers due to some crazy lsd's they have been running (they weren't strapped down though).

You know you've got a really tough car when you can't get an accurate dyno reading from it  :)

The problem we have is that when the nos is injected, the power comes in so hard that the straps (3 of them) have trouble keeping the car down. The straps are tied to a bar attached to the dyno and it bends.

Is 1,550 Nm a true Nm figure? Is it comparable to the figures you read in the magazines.

AFAIK, this figure is accurate to the wheels. Magazines tend to quote torque at the fly as all tests are performed on an engine dyno.

There is another measurement of tractive effort but I have NFI what it translates to. All I know is that I'm making more than 13000Nm of tractive effort.

  • 2 months later...
:bonk: i have the record now lol

see you all at jamboree

heard about that.... congrats.

i have heard people saying that the car wasn't or couldn't be driven home though? what happened to it?

not taking the piss, i am curious as i don't know how long a motor could last with that kind of power?

Jamie

jas/slo32,

What was the total amount of power your car has made and was that in 4wd mode or Rwd mode.

Congrats btw and are you expecting more out of it or are you happy with what it is currently making.

i read on another forum it made 1070rwhp, correct me if i got it wrong.

i think its an auto gtst with rb30/26 in it if i am thinking of the right car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia body...
    • This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
×
×
  • Create New...