Jump to content
SAU Community

am i stuffed?

mr_rbman

By mr_rbman,
in South Australia

 Share

Recommended Posts

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

yeah mate I agree with what you say, but the fact remains that almost every person I know (that's been through Regency) has been knocked back for coilovers. And yes, some older cars have been knocked back for saggy springs and had to go get new ones too.

Like Matt said, it just depends who you get on the day, and with some if you dared ask them a question as to why something wasn't allowed or, god forbid, complained, they would look twice as hard over your car.

MADGT4 Mentor

MADGT4

Posted
Posted
yeah mate I agree with what you say, but the fact remains that almost every person I know (that's been through Regency) has been knocked back for coilovers. And yes, some older cars have been knocked back for saggy springs and had to go get new ones too.

Like Matt said, it just depends who you get on the day, and with some if you dared ask them a question as to why something wasn't allowed or, god forbid, complained, they would look twice as hard over your car.

Amen to that!

When ever your at Regency its "yes sir no sir, three bag full sir"

I wouldn't dare question an inspector!

90% of the time i am nice to the inspector they will be nice back but like its been said, just depends on the day.

PS. can you go through regency for us and prove that what you are preaching is true?

chops Experienced

chops

Posted
Posted

HSV GTS was available (since VY I think) with Ohlins adjustable coil over suspension - an Australian produced car.

HOWEVER, I'm sure they had to make it comply with the relevant ADRs, and I think this is the issue rather than the fact it is a coil over or adjustable.

Any component that is fitted to a vehicle that has not been proven to comply with ADRs, they can force you to remove, or to prove it does comply. The latter is not a cheap exercise by any means.

I'm guessing the manufacturers of aftermarket Japanese performance products have no interest in gaining compliance with our design regulations, as the cars they make them for were never to be sold here. Sure, some of them may comply - but who's going to pay to prove it?

MattR Veteran

MattR

Posted
Posted

chops has it in one. IF we put something on our cars that does not meet or comply with our ADR's they have all right to defect us. No matter if the after market parts are betr than the originals or not. in the event of an accident the insurance company can deny the claim if you have non ADR compliant parts on the car

MADGT4 Mentor

MADGT4

Posted
Posted
HSV GTS was available (since VY I think) with Ohlins adjustable coil over suspension - an Australian produced car.

HOWEVER, I'm sure they had to make it comply with the relevant ADRs, and I think this is the issue rather than the fact it is a coil over or adjustable.

Any component that is fitted to a vehicle that has not been proven to comply with ADRs, they can force you to remove, or to prove it does comply.  The latter is not a cheap exercise by any means.

I'm guessing the manufacturers of aftermarket Japanese performance products have no interest in gaining compliance with our design regulations, as the cars they make them for were never to be sold here.  Sure, some of them may comply - but who's going to pay to prove it?

Got it in one!

Couldn't of said it anybetter myself

skyline Collaborator

skyline

Posted
Posted

That could well be the case,but not all of us run shitty japenese suspension,and why wouldnt you question an inspector at regency?I would want to know if he knows what he's talking about and an answer so the problem could be resolved!

Regards,

SKYLINE (Kym)..

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

Kym, you really need to read the Regency thread started by Joel - you simply would not believe some of the shit said and done by the Regency inspectors. Catch any one of them in a bad mood and you might as well take a big jar of vaseline - no matter what car you have or how legal it is.

Cubes Grand Master

Cubes

Posted
Posted
Kym, you really need to read the Regency thread started by Joel - you simply would not believe some of the shit said and done by the Regency inspectors. Catch any one of them in a bad mood and you might as well take a big jar of vaseline - no matter what car you have or how legal it is.

me?? You mean Steve? The stick regency thread?

MADGT4 Mentor

MADGT4

Posted
Posted
That could well be the case,but not all of us run shitty japenese suspension,and why wouldnt you question an inspector at regency?

Firstly how and why is Japanese suspension shitty?

Secondly from what you are saying and they way you are coming accross it seems as if your regency experience is not exactly the best.

I think you should take it from the people that have been "in the field" so to speak, instead of "a friend of a friend" or "i heard".

How many time have you actually been through regency if you don't mind me asking?

And finally why WOULD you question an inspector, as far as they are concerned they hold the power to put you back on the road or not, if someone was tryin to tell me how to do my job i would reem them too.

mr_rbman Grand Master

mr_rbman

Posted
  • Author
Posted

well i just got my car passed by the cops and booked into regency 4 weeks from today. So i'm allowed to drive it til the appointment with no restrictions what so ever which my mates told me i would have! Dad's offered to take it in for me cause i made him read the regency experiences thread on this forum and he felt sorry for me.

mr_rbman Grand Master

mr_rbman

Posted
  • Author
Posted

mum's working but dad said he will make sure he can take it in for me, just a couple of things left to fix now, thanks for the engine stand and the ride Joel, was much appreciated and made me miss the VL for that low down torque, can't wait to get the motor all don and running!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...