Jump to content
SAU Community

Recommended Posts

Hi guys, I know nothing about networking, hubs, switches straight through / crossover network cables etc.

Can someone please let me know:

1. what componentry i need to hook up one PS2 to another PS2 (both slim) to be able to play GT4 against each other

2. how to hook the bastards up

It would be very much appreciated!!

cheers

check out Alex's homepage here for help on this

http://ausdigital.net/articles/show.php?id=2

as for your questions about the HDD in the PSTWO (slims) Yes it can be done, you just need a coppy of a program called USBeXtreme (i got mine about two weeks ago for $69) External HDD caddy ( i prefer them to have a mains powered, not running of the USB power) and HDD (any size will do, but keep in mind that the game images are around 4GB)

Have fun

drakan

Sorry to hijack, so you can just buy a USBeXtreme to play backups without a chip? just plug a portable hard drive in with the game image on it?

Bingo, no worries about your PStwo warranty either, cause they just plug into your USB port and the USBeXtreme is a usual games disk.

i'll try and give you an general idea.

step 1, buy coppy of usb exetreme ( around depends where you get it $69)

step 2, get a 3.5" or 2.5" HDD and caddy to sute. (i've got a 120GB thats got

about 27 games on it, and it's pretty much full)

step 3, download the games ripping software from usbexetreme from UsbeX's homepage..ummmm....http://www.hdadvance.com/download/ I use the window's mode client, as it's so easy even my girlfriend can use it.

step4, plug USB HDD into pc, format (NTFS) then use the USBeX's client software to format (not sure it changes the formatting, but i did the second format anyway, mightn't have had to)

step5, rip games most of the games i've tryed ripping have worked, some don't, i think the success rate is around the 90% mark.

step6, plug usb caddy into PS2 insert usbExetreme disk and power both (caddy and PS2) up

that's about it.

If any of that has made any sence, then good for me, else check out this page.

http://www.hdadvance.com/usb_extreme_how-to-use.htm

But yeah no Mod chip is needed your PS2 don't need to be opened up, and you don't have to pay anyone to do it, you can do it all yourself.

pm me if you have other questions about USBexe or PSslims

yeah sorry about the hijacking :cheers:

No worries on the hijack! that's the next thing I am going to do... step by step guide to HDD 'backup' gaming is A-OK by me :D

plus got GT4 networked today :( yay!

This should just be the "I don't know anything about PS2, help me!" thread ;)

guys, don't go buying USB Extreme. Just download "USB advance" and get someone with a modchipped PS2 to dump it onto your memory card.

Also you're not guranteed you can play ANY game off the HDD, all the newer games like GT4 have protection (although they can be defeated) against it, and some of the older games aren't compatible with the method.

Also I'd hold off if I was getting a USB HDD or anything, Team Xtreme just came out with an IDE adaptor for slimline PS2's so you can use HD Loader rather than USB advance or USB extreme (which is a commercial repackaging of USB advance) in combination with a regular IDE HDD.

If you guys want I can make a xps (X-Port savefile) with the USB Advance, FTP server software (so you can FTP into your PS2, and issue unix commands to mount and unmount images of your games on the HDD) and a launch menu so you have a visual start point.

Funky if what your talking about is the full fledged IDE interface kit for the slim PStwo console that is currently under development by Team Xtender crew, then the installation will be very close to the xbox scene's LPC rebuild Kits, place down the flex pcb and solder the points.

Not such an easy instalation for your average home handyman...and if you've only just baught you Slim, or your still in warranry, then this instalation will blow that away.

I know the beta testing is just beginning on this, but last i heard they were still having problems with the HDD wanting to format all the time.

in any case keep us updated on the matter if you know of any new news?

drakan

edit: oh yeah not too sure on the facts, but if you download UsbAdvanced, don't you need something like swap majic to boot the burnt disks....oh hold on thats where dumping it onto the memory card.....no hold on again! Dumping onto the memory card uses the exploit (PSX game Disk) to 'search' the memory card for any programs, usb advanced, and boot them right? But i'm pretty sure they fixed that exploit with the Slims.

I could be wrong though, i like to think i keep a rather open mind.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • lol no cats running str pipes … might put the high flow back on but I suspect it might effect my ignition timing a bit. 
    • That looks a bit like yellowing to me. If the rear bar was looking like that from rich idle, I'd ask the question, do you have a catalytic converter fitted, and fully working?
    • Oh yeah gets really bad down here. I’ll have to upgrade the heater and wind screen wipers as well for optimal performance.
×
×
  • Create New...