Jump to content
SAU Community

Recommended Posts

Well yesterday was the first day of full wet weather driving for me in my car since ive had it. (Almost 3mths)

I think in the future i might just walk/ride to work (5km).

Driving my old car i knew the limits of how hard i could push before wheels would slide and brakes would lockup. In this car (R33 GTS-T) I dont.

* 90 Degree corners are near impossible under any accelleration.

* My mats get dirty

* Pedals are slippery and squeaky (can anyone recommend a good set of legal pedals for rubber soled shoes?)

On a good note, i cant use turbo or drive fast so im saving heaps of fuel.

:D

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/
Share on other sites

yeh in my car you may as well be driving on ice if it comes on boost. off boost it's fine though :D You just gotta know to expect the odd step-out when going round corner's etc... and be prepared for it :)

on a side note I'm really glad the rain's arrived so that the bushfires can be put out. I'm sure the people who almost lost their homes are very thankful as well :) very good news :)

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-106769
Share on other sites

Originally posted by benm

* 90 Degree corners are near impossible under any accelleration.

no offence meant but...

don't you think that you might be over reacting there. well, it's either that or you can't drive:rolleyes:

i found wet wether driving to be one of the more exciting things about owning a rwd. sure it's dangerous and you can slide out easy but it's damned fun

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-106777
Share on other sites

Originally posted by ONARUN

sure it's dangerous and you can slide out easy but it's damned fun

Im in both boats for this...

Jumping for a N/A car into a turbo RWD is so much different.

The driving styles are totally different... Usually u would have to

give it some gas around the corners in the N/A so not knowing

what to expect in the sky you would do the same..give it some

gas...heehhea. i bet u got a big fright benm not expecting it..

and yes it is fun in wet.. u get to know u'r tyre limits and how

you car reacts once traction breaks loose...

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-106799
Share on other sites

Exactly....

I've gone from a N/A 50kw FWD car to a Turbo 192rwkw RWD Car.

The last time their was a light shower of rain (enuff to wet the roads but not enuff for wipers) it brought all the dirt and oil to the surface and some 90 degree corners i literally slid out just turning them (w/o accelleration).

I'd love to go to a track day even just to do 5-10 laps so i can work out the limits of the steering. My old FWD car as u all would expect wasn't the best at cornering so im very cautious with the skyline.

:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-106801
Share on other sites

no offence meant but...

etc etc

exactly driving in the wet is fine unless your a bad driver...

Driving my old car i knew the limits of how hard i could push before wheels would slide and brakes would lockup. In this car (R33 GTS-T) I dont.

???? im confused, how do you drive in the wet ?? sorry im confused.

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-107005
Share on other sites

During the rain i switched from the Skyline to a gutless BMW 318. lots different. you can floor it and reef it around corners (in a way that would write off your skyline) and it still wouldn't unstick. its so much fun doing it in the Line' tho. Especially trying to perfect your wet road launching technique

One other thing i've noticed: Why do people seem to tailgate even more in the wet??? it seems like the rain is a signal for every brick-headed tailgater to come out for a drive (just stay off my ass!):shake:

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-107534
Share on other sites

Originally posted by Tooly

One other thing i've noticed: Why do people seem to tailgate even more in the wet??? it seems like the rain is a signal for every brick-headed tailgater to come out for a drive (just stay off my ass!):shake:

DON91E i think they referring to u buddy!

ease up!

hahahahah:D

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-107693
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...