Jump to content
SAU Community

Recommended Posts

Well yesterday was the first day of full wet weather driving for me in my car since ive had it. (Almost 3mths)

I think in the future i might just walk/ride to work (5km).

Driving my old car i knew the limits of how hard i could push before wheels would slide and brakes would lockup. In this car (R33 GTS-T) I dont.

* 90 Degree corners are near impossible under any accelleration.

* My mats get dirty

* Pedals are slippery and squeaky (can anyone recommend a good set of legal pedals for rubber soled shoes?)

On a good note, i cant use turbo or drive fast so im saving heaps of fuel.

:D

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/
Share on other sites

yeh in my car you may as well be driving on ice if it comes on boost. off boost it's fine though :D You just gotta know to expect the odd step-out when going round corner's etc... and be prepared for it :)

on a side note I'm really glad the rain's arrived so that the bushfires can be put out. I'm sure the people who almost lost their homes are very thankful as well :) very good news :)

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-106769
Share on other sites

Originally posted by benm

* 90 Degree corners are near impossible under any accelleration.

no offence meant but...

don't you think that you might be over reacting there. well, it's either that or you can't drive:rolleyes:

i found wet wether driving to be one of the more exciting things about owning a rwd. sure it's dangerous and you can slide out easy but it's damned fun

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-106777
Share on other sites

Originally posted by ONARUN

sure it's dangerous and you can slide out easy but it's damned fun

Im in both boats for this...

Jumping for a N/A car into a turbo RWD is so much different.

The driving styles are totally different... Usually u would have to

give it some gas around the corners in the N/A so not knowing

what to expect in the sky you would do the same..give it some

gas...heehhea. i bet u got a big fright benm not expecting it..

and yes it is fun in wet.. u get to know u'r tyre limits and how

you car reacts once traction breaks loose...

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-106799
Share on other sites

Exactly....

I've gone from a N/A 50kw FWD car to a Turbo 192rwkw RWD Car.

The last time their was a light shower of rain (enuff to wet the roads but not enuff for wipers) it brought all the dirt and oil to the surface and some 90 degree corners i literally slid out just turning them (w/o accelleration).

I'd love to go to a track day even just to do 5-10 laps so i can work out the limits of the steering. My old FWD car as u all would expect wasn't the best at cornering so im very cautious with the skyline.

:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-106801
Share on other sites

no offence meant but...

etc etc

exactly driving in the wet is fine unless your a bad driver...

Driving my old car i knew the limits of how hard i could push before wheels would slide and brakes would lockup. In this car (R33 GTS-T) I dont.

???? im confused, how do you drive in the wet ?? sorry im confused.

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-107005
Share on other sites

During the rain i switched from the Skyline to a gutless BMW 318. lots different. you can floor it and reef it around corners (in a way that would write off your skyline) and it still wouldn't unstick. its so much fun doing it in the Line' tho. Especially trying to perfect your wet road launching technique

One other thing i've noticed: Why do people seem to tailgate even more in the wet??? it seems like the rain is a signal for every brick-headed tailgater to come out for a drive (just stay off my ass!):shake:

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-107534
Share on other sites

Originally posted by Tooly

One other thing i've noticed: Why do people seem to tailgate even more in the wet??? it seems like the rain is a signal for every brick-headed tailgater to come out for a drive (just stay off my ass!):shake:

DON91E i think they referring to u buddy!

ease up!

hahahahah:D

Link to comment
https://www.sau.com.au/forums/topic/7254-wet-weather/#findComment-107693
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...