Jump to content
SAU Community

Recommended Posts

GDay,

Im in the process of putting an RB26 in my R32 gtst. Its a full rebuild engine with all the forged stuff and a single 700hp garrett high mount turbo. The guy who has done the engine work, and who will be modifying the exhaust, has recommended a new 3.5inch exhaust. I currently have a stainless 3inch turbo back system which cost around $2000. I dont want to upgrade if its unneccessary.

My question is:

Will a 3inch exhaust be sufficient for around 350rwkw maximum?

If not, is four inch better?

I have been told (and read) that anything greater that 3inch is overkill. Is this correct for my application?

Any advice from people with first hand knowledge in this area would be appreciated.

Shaun.

Try the one you have ATM it shouldnt be throttling/choking the engine. my freinds car just dyno'd 394rwkw with a 3" exhaust its a rb30det with a big single KKK turbo.

Then he took off the cat and put a straight thru pipe and dynoed 412rwkw!

you cat might hold you back but the exhaust will prob be fine for your application

My GTR R33 has been dynoed at 412awkw and I have a 3" exhaust system.

The thing is when I removed the external wastegate pipe to be plumped out to atmosphere I picked up another 5kw.

This is using a straight through pipe as my cat which was also at 3" but I am now ungrading to 3.5" system as there is more power there.

There are no gains above this and the outlet on the turbo would be no greater then 3.5" so there is no point in going any larger.

Your exhaust system is as big as the smallest point in the system.

I don't want to to this as well as I am so very happy with the way my car sounds and don't want to lose it but the extra power is just sitting there doing nothing....

The following modifications are as follows:

RB26 ENGINE

HKS 88MM FORGED PISTONS

HKS CON RODS

HKS STEP 2 280 CAMSHAFTS

HKS CAM GEARS

HKS 1.6MM HEADGASKET

JUN OIL PUMP

PERFORMANCE METALCRAFT 8L RACING SUMP

PORTED HEAD

NISMO BEARINGS

NISMO CAMBELT

AUTRONIC SMC AND LOOM

1000CC INJECTORS

BLITZ FUEL RAIL

MALPASSI FUEL REG

SPLITFIRE COIL PACKS

GARRET BALL BEARING TURBO(NEW T04Z) - RACEPACE CUSTOM

RACEPACE CUSTOM EXHAUST MANIFOLD

TRUST EXTERNAL WASTEGATE

NISMO G-MAX TWIN PLATE CLUTCH

HKS GT SPEC DRAG INTERCOOLER

CUSTOM FUEL SWIRL POT - TWIN OUTLETS FED BY GTR FUEL PUMP

2 X BOSCH 044 EXTERNAL FUEL PUMPS

HKS OIL COOLER KIT

TRUST EXHAUST 3"

ARC ALLOY RADIATOR

ARC OIL CATCH TANK

HKS EVC4

HKS COLD AIR INTAKE

TUNED BY BEN @ RACEPACE MELBOURNE

CURRENTLY MAKING 417KW@THE WHEELS AT 1.3 BAR

WAS MAKING OVER 500KW WITH PREVIOUSLY FITTED HKS T51R

Cams make the engine lumpy like a V8 but it's idle is awesome.

I don't find any faults with street driving at all, has good power off boost and loooovvvves to rev and pull's hard all the way to redline @9500rpm.

Like to see if I pik up more power with a 3.5" exhaust, I think there is some left in it..... well just have to see

Generally a 3.5" is required up over 300rwkw to be 'optimal'.

I want to keep the noise down so I will be going a 3.5" dump in to a 3.5" cat, then a 3.5" pipe in to a intermediate muffler that splits the 3.5" in to 2 x 2.5" pipes, 2.5" pipes to the rear of the car where there is another large muffler, 2x 2.5" tips out of the muffler.

It will flow really well, not drone and sound quite nice. :D

Its very similiar to the XR6 APS exhaust system.

Generally a 3.5" is required up over 300rwkw to be 'optimal'.

I want to keep the noise down so I will be going a 3.5" dump in to a 3.5" cat, then a 3.5" pipe in to a intermediate muffler that splits the 3.5" in to 2 x 2.5" pipes, 2.5" pipes to the rear of the car where there is another large muffler, 2x 2.5" tips out of the muffler.

It will flow really well, not drone and sound quite nice. :D

Its very similiar to the XR6 APS exhaust system.

Hey cubes, this is a clever way of reducing the noise and still keeping the noise levels down....I like it :D

Q. How would a HKS Super Dragger Exhaust sound (3.5" straight through) on a built RB26?

This is what I was thinking of doing when I replace my 3" system to a 3.5" system.

Weird thing is I have a 3.5" system to the cat then 3" system to the rear :microwave

i'm not sure how the Super Dragger would sound.. Obviously loud.

My goal was to make the exhaust look fairly standard out the rear and sound as quiet as possible with no drone inside the cabin. The large intermediate muffler was the only way to go with 2 x 2.5" pipes.

Apparently a single 3.5" does flow better than 2 x 2.5" pipes but it is much louder.

  • 3 weeks later...

Ive just sold my 3 inch exhaust in favour of going to 3.5. Can anyone recommend a japanese brand exhaust that has the following features?:

• Stainless steel

• Sits nice and close to the body. Ive heard that some jap exhausts hang down too low.

• Isnt offensively loud so that it attracts cops.

Also, if anyone has info relating to where i can get such an exhaust, can you let me know?

Any feedback would be appreciated.

Thanks,

Shaun.

0414972596

I would highly reccomend a Trust TR (they are 3.75 inch i think) they fit the bill for your requirements except for the stainless steel part which is really nothing major. The silencer system they have is very effective and they make room for large power increases.

Advan Perfromance in Silverwater stock them - 9647 1326

IMO a japanese car needs a new japanese exaust.

Believe it or not but japanesemotorsport have much better prices on the trust exausts. I think mine was around 1200 delivered(2years ago), took me minutes to install, not much louder than stock at idle, great note, no drone, etc, etc.

Do not commit the sin of the australian made catback system., it will look and sound like shite, not to mention being the japanese ones are typically designed on CAD software.

Support local front/dump pipes instead!!!111@2

For look, sound, performance you cant go past a japanese system, stuff the price :wassup:

Support local front/dump pipes instead!!

Ha Ha, Funny sh1t! Thats exactly what im doing. Ill give JMS a ring, but if im gonna pay the dollars i think i want stainless. I might look into Apexi.

Guest two.06l
Support local front/dump pipes instead!!

Ha Ha, Funny sh1t! Thats exactly what im doing. Ill give JMS a ring, but if im gonna pay the dollars i think i want stainless. I might look into Apexi.

Give Peter a ring at Advan, they get some great TRUST front pipe copies made up...you would be hard pressed to tell the difference!

P.S. why do you want stainless?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...