Jump to content
SAU Community

BBS Wheels and Tyres

PTR33
 Share

Recommended Posts

PTR33 Proficient

PTR33

Posted
Posted

Sold my Skyline last week and it went with stocko wheels so I have my BBS wheels for sale.

17x8 and 17x9 BBS Wheels in Metallic charcoal with GM "Tungsten Mica" rims.(rims repainted from red)

Wheels even have genuine BBS Valves and Valve caps.

Federal SS595 tyres 235/45 front and 255/40 rear.

Don't dis these tyres, Brisbane Street Machines run the 255's on their 9 second R32 GTR! That was why I picked them. They are DAMN sticky.

Tyres still have HEAPS of tread, 7mm on fronts and 6mm on rears, measured with a tread depth guage.

Looking for a Quick sale. Easy worth $1200 but let's cut out the haggling and say that I will take a grand in the hand. Ok, I've dropped $200 from the asking price so $1000 NO OFFERS

Located in Wellington Point Brisbane.

PICK UP ONLY. NO FREIGHT. DON"T EVEN ASK

and No, I don't want to sell them that much.

Replying here or PM will be a bit hit and miss as I don't get on here as much as I used to. For some reason it takes about 5 minutes to bring up each page on SAU. No other sites are affected. I mean it has taken me over half an hour to post this and I'm still not finished!!!

So best to ring me on my mobile.

0418 260 862

Happy buying

Peter

Link to comment
https://www.sau.com.au/forums/topic/73611-bbs-wheels-and-tyres/
Share on other sites
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...