Jump to content
SAU Community

Recommended Posts

Hi people out there,

I was just wondering if anyone knows how hot their turbo's get. I know that this is a "how long is a peice of string" question but I am interested to know if anyone has gone for a drive or race perhaps and whacked a laser thermometer on their turbo just to see how hot it gets. Perhaps someone has read this info some where. If you have, then please tell...

Your tubo size and engine will make a difference in heat as smaller turbos run hotter, etc. Obviously, there would be an operating range depending on how hard you drive, etc. From what I understand the operating temp could be anywhere from 100 deg c to 1000 deg c! Anyone know?

Chriso

Link to comment
https://www.sau.com.au/forums/topic/73627-how-hot-is-your-turbo-do-you-know/
Share on other sites

lol are you having fun posting this on every single forum, saw it on boostcruising ust before, now here :P

Oops... Busted. :Oops:

:)

Yeah, bit of a forum hussy.

I had a tiny leak at my dump flange and needed to know how hot it get so I can get the right stuff. Looks like I won't need it anymore anyway as I found some loose screws... Still interesting to know though...

wow, you must be fast to jump out, pop the bonnet and look.

i've seen mine red but only on a dyno

i find it stays red for at least around 30 seconds and glows for a minute or so..

and yes i am usually quick, and when i have seen it i have been on a road in the middle of nowhere so no cars and is safe stop anywhere whenever :rofl:

Could be you're right. Damn hot anyway.

Means your trying hard enough :cheers:

btw a bit off topic but i wanted to ask you,

after u fitted the hicas lock bar, was there a difference in the weight of steering at any speed??

i ask this because im quite sure the steering weight varies depending on speed, and figure it might get stuffed up by locking the hicas..

Take a look in the tutorial , but the quick answer is yes it can get hard at low speed (40) due to the system being electrically variably loaded, according to speed. This is common but dissapears with extra caster.

I've had glowing turbo on stock r32 after hard mountain work.. I think its just a combination of having no dump pipe to dissipate the heat better, and the fact that the R32 turbo is pretty small. Could also be related to clogged water lines, but need to investigate this further.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...