Jump to content
SAU Community

Hybrid COPY FMIC GROUP BUY - ONLY $220 EACH - VIC


Recommended Posts

Can you get these cores in 100mm thick. Ie; 600x300x100mm?

HEY mate~ I have 600x300x105 bar and plate here~~

please email me = [email protected]

to get more info about the cooler,,,,

I can do just 380 for it delivery~

THANKS~~~~~~~~~~

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

HEY mate~ I have 600x300x105 bar and plate here~~

please email me = [email protected]

to get more info about the cooler,,,,

I can do just 380 for it delivery~

THANKS~~~~~~~~~~

Hey buddy how about you start your own thread :rofl:

Is this the same one that has a max recommended PSI of 25psi? If so I'm in for 2 as well.

Hi mate, these are the ones. They are tested up to 25psi and have no problems at this level. You can go higher if you want but recommended of only 25psi.

The coolers are on the ship and will be here in about 2 weeks.

If you want to order please send me an email with your details.

I can get 100mm cores but I have to organise a group of 10 people at least. Price would be around $350 or there abouts.

Cheers

Greg

Get em made at any exhaust shop using mild steel and use silicon hoses to join em? that's what I'll be doin anyways. The wholesaler that these intercoolers come from just started selling silicon hosing as well... EXAUNV, you might wanna check on that.

mild steel? That sounds like trouble to me once it starts to rust. Even if it was treated I wouldn't trust it.

EXAUNV,

Have just sent email for one.

Thanks.

El Bee

replied :D

Only about 15 or so left out of the 50 coming!!! must be quick at this price!!

Hi Guys NO COOLERS LEFT!! ALL 50 GONE.

I will be having another buy and am taking names NOW!!

Email me if you want to be on the next list. Will be due in around 4 weeks time.

Cheers

Greg

  • 2 weeks later...
Hi Guys NO COOLERS LEFT!! ALL 50 GONE.

I will be having another buy and am taking names NOW!!

Email me if you want to be on the next list. Will be due in around 4 weeks time.

Cheers

Greg

whats the go with the others your getting in, anyword yet???

People have pulled out so still room in this buy. Coolers have been delayed and are expected around the 16th (next Thursday)

Send me an email to order :)

Cheers

Greg

Hi mate, at the moment I have 30 spots left as only 20 people have left a 50% deposit as yet. Coolers are now expected to arrive on the 16th of June and then a few days for customs. I am located in Werribee, Vic (western suburbs) and if people are in Vic they are welcome to pick up.

If you would like to be added to the list send me and email to [email protected] and I will send all the info to you and add you to the list of coolers to arrive late this week.

Cheers

Greg

I will only ship these out by COD or cash on pickup!!!

By the sound of it I am one of those that pulled out. My fault of course.

What annoys me is that my understanding of COD is that you pay for it when it is delivered.

I will not pay for anything before it is within my reach. I don't care who you are.

Part of an email sent out by you 25 May as follows:

"Hi, and thanks for your order for the front mount intercoolers. The intercoolers will be leaving China this Friday (May 27th) after unexpected delays and should arrive in Australia around the 10th of June.

We will now however require 50% of the money before the items are sent out (other 50% will be left for COD). All 50 coolers from this first lot have been accounted for and you are getting this email to confirm that you have made it on the list."

It sounds like over half of your original respondents were as surprised as I was.

I would still like one of these COD but you will not be getting anything in advance.

El Bee

By the sound of it I am one of those that pulled out. My fault of course.

What annoys me is that my understanding of COD is that you pay for it when it is delivered.

I will not pay for anything before it is within my reach. I don't care who you are.

Part of an email sent out by you 25 May as follows:

"Hi, and thanks for your order for the front mount intercoolers. The intercoolers will be leaving China this Friday (May 27th)  after unexpected delays and should arrive in Australia around the 10th of June.

We will now however require 50% of the money before the items are sent out (other 50% will be left for COD). All 50 coolers from this first lot have been accounted for and you are getting this email to confirm that you have made it on the list."

It sounds like over half of your original respondents were as surprised as I was.

I would still like one of these COD but you will not be getting anything in advance.

El Bee

The whole reason deposit was required is due to the fact that people were pulling out. If I send out 50 coolers at my cost and then only 30 people pick them up I am out of pocket between $20 - $40 each cooler in freight costs. I don't see how this is so hard to understand, and I believe that my honesty has been proven on these forums.

I run a registered business in Australia and have sold many items on these forums. Aswell as the fact that the deposit is being made into my business bank account. You can check my business details at www.abr.gov.au and confirm with my ABN which is: 45033299305 and my business name which is GK Technologies.

I can't see the problem?

Greg

The whole reason deposit was required is due to the fact that people were pulling out. If I send out 50 coolers at my cost and then only 30 people pick them up I am out of pocket between $20 - $40 each cooler in freight costs. I don't see how this is so hard to understand, and I believe that my honesty has been proven on these forums.  

I run a registered business in Australia and have sold many items on these forums. Aswell as the fact that the deposit is being made into my business bank account. You can check my business details at www.abr.gov.au and confirm with my ABN which is: 45033299305 and my business name which is GK Technologies.

I can't see the problem?

Greg

I still don't care who you are, or that you run a Business registered in Australia.

You declared on 25 May that all intercoolers were accounted for, and then 27 May you were asking for 50% deposit in a personal email. I thought this fact needed to be made public.

I am not about to pull out of the deal as originally specified, but you want to change the deal midstream.

Others can think what they like (whether this is fair or standard business practice etc) but I think that you are trying to breach a contract.

El Bee

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...