Jump to content
SAU Community

Near New Garrett GT30 Turbo For Sale. $1500

Shaun
 Share

Recommended Posts

Shaun Mentor

Shaun

Posted
Posted

Ive got a near new GT30 for sale. Turbo has done about 3000kms since new. 0.7A/R front, 0.86 A/R rear. Looks brand new. $1500 firm. Its externally wastegated too.

Shaun

0414972596

Shaun Mentor

Shaun

Posted
  • Author
Posted

Its a T3 flange. It will fit on the standard RB20/25 manifold, however, you need to weld a spacer to the manifold so that the comp cover clears the block. Not a huge job, i got GCG in Sydney to do mine. It would be perfect for an R33 engine id say. Yes, i have receipts; not sure about warranty, i didnt ask at time of purchase. It is quite new though.

Nismoid, Im not sure what you mean by the OLDER style TO4 wheel?? As this turbo is only about 8 months old, and is an off the shelf Garrett item i would have thought its pretty new stuff. I was of the opinion that TO4's were old tech truck stuff, but im not an expert, so best to speak to GCG for that sort of stuff. I thought the 0.82 was 550hp and the 1.06 was 600hp.

Shaun.

Shaun Mentor

Shaun

Posted
  • Author
Posted

Nismoid, you have a PM. Please reply.

nice turbo indeed.  

Is this a 500 or a 550hp version dude?

As it has the older t04 wheel i think it then makes it in the 500 range if i recall correctly.

t.howells Contributor

t.howells

Posted
Posted

I had exactly the same turbo on my rb20, made 200kw atw easily without pushing all that hard. The big front cover keeps the heat down and makes that awesome hollow choof sound. The front wheel is capable of pushing 550hp worth of air, but its the core design that sets these apart from the old t04's, mine would be still spinning 25 -30 sec's after switching car off! A very responsive (for its size) and durable turbo and at $1500 sounds like an awesome investment for r32 or r33, of r34 for that matter. Wish I could get em that price when I bought mine. Oh Yeah and I have a modified vg30 (to suit gt30) housing with integral w/ gate available for those who may want to put on stock manifold, also a split dump pipe stainless. see my thread.

Shaun Mentor

Shaun

Posted
  • Author
Posted

Yeah, it does take a while to spin down due to the ball bearing core!

Please take note that these Garrett GT30 Ball Bearing Turbos do not have the "older style" TO4 wheels in them. They do, however, have a TO4s (the addition of the "S") trim compressor wheel in them which is the current model GT Spec super duper compressor wheel.

Please dont be fooled by the TO4 thing and its old technology connotations, as this is not the case at all.

And the above bloke is right; it is an excellent price considering the lack of use this thing has had.

Shaun.

QQQQ Rookie

QQQQ

Posted
Posted

Hi Shaun,

Is it the Exhaust A/R or the Inlet A/R that dictates HP rating? I'm very interested but not sure if it will do the job on my new rb30det. I am aiming for a little over 300rwkw. Is this turbo big enough for this target?

cheers

Steve

Shaun Mentor

Shaun

Posted
  • Author
Posted

QQQQ, you have PM. Im sure this turbo will suit your needs and provide excellent response.

All the specs of the GT30 series turbos are provided on the GCG website under technical info and specifications of the GT25 - GT35 range.

Youll also find that these things are $2650 new.

Shaun Mentor

Shaun

Posted
  • Author
Posted

Assuming you mean low mount on the standard manifold, you need the following:

• A spacer welded on the manifold flange so that the comp cover clears the block.

• A screemer pipe welded into the manifold so that an external wastegate can be used.

• New water and oil lines.

• New dump pipe

• New induction piping to suit the 4inch bell mouth

• Modified intercooler piping to the turbo.

It worked well on my RB20, but if i had my time over again, id just go high mount. just my opinion. The turbo is sold anyway........finally!

  • 3 weeks later...
shrike_73 Contributor

shrike_73

Posted
Posted

Hi Shaun

Im considering getting a GT30R or a Garrett T3/T4 for my RB20 and just wondering what rev range the GT30 would start getting boost at when you had it on your car?

Ive heard some people say it will not get positive boost until at least 5000rpm?

Is this true?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jayden_l33
      Squeaking clutch/throw out bearing

      By jayden_l33 · Posted

      I am getting the same issue. Did you resolve it? I just got it after installing my new super coppermix and literally the same issue, new fork, new 18mm carrier, release bearing that came with the kit and replicated the exact same sound. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      If you like - I have the STL files so I can email em. There's a couple of gotchas (i.e the holes are not threaded so you might need/will need) to utilize some M3 melt-in threads for some of the points. However if you want to be super accurate, and are willing to remove your calipers and your SHOCKS it's a really good tool. You also might need to scale the part that measures the tyre width a bit wider. It defaults to a 7.5in tyre and I mean who is running that. Luckily with the magic of CAD this is very easy to rescale.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • Duncan
      Who has a Infiniti Q60, Q50 (V37)?

      By Duncan · Posted

      In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
×
×
  • Create New...