Jump to content
SAU Community

Recommended Posts

So....with a FMIC ill only be looking at a difference of 12P.S.I as opposed to 10P.S.I....cause if im correct a standard turbo cant be boosted more than 12p.s.i safely regardless? Is there a noticable difference in power i.e on dyno run? or is it really not worth the cost if im leaving my turbo standard??

Was that 20KW gain running a stock turbo at 13P.S.I?? And does anyone know if the amount of boost you can run safely depends on the model of the car? eg series 1 vs series 2 r33?

It depends on what car it is, what mods it has (if it isn't stock) and the over all condition that the car/engine/turbo is in. Every car is different, there are no 2 the same. A mate has the exact same car as his brother, one is a 89 gts-t and the other a 90 gts-t, now we are talking 3 months between build dates of them.

They are exactly the same, stock as a rock bar a aftermarket pod, and a end can. Both are stock internals and running gear yet one has 42 rwkw more when put on the dyno.

Why, who know's it could me a number of reasons, the tubro life and engine condtion, stock intercooler, the point is that no two cars are the same, therefor you can't base them as the same.

Sure you can use it as a guide line and go from there but what works for one doesn't mean its going to work for the other :cheers:

Could be to do with the R33 ECU being very prone to dropping timing when intake temps get up. Seems like the R32 doesn't mind so much?

I just bled up my boost to 13psi after fitting my front mount, but I can barely feel any noticeable difference as everything else is stock bar a k&n panel filter. It just drops most of the boost anyhow back to 10psi. Needs exhaust, needs better airflow to the filter...blah.

In other words, raising the boost by itself is pretty pointless.

Yer good point, the Rb25 being 9:1 comp would be closer to detonation, high intake temps probably tip it over the edge quicker.

barely any difference with 13psi... lol That stock exhaust must kill the turbo's efficiency, going from 10.9psi (stock boost with 3" exhaust) to 12.5psi I noticed a definite difference.

On stock 10.9psi feels N/A.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • On the hot side pipe work, or if you want to compensate for pressure loss from the IC, post intercooler on the cold side, pre-throttle
    • They're notoriously difficult if you traverse forums... the 102TB and FAST102 are so bad that most people actively don't buy it unless they REALLY want that extra 1hp. The idle stuff isn't really that hard. The cam is pretty manageable and while it acts like a larger cam the whole car actually drives smoother than before. I like to just tinker so if I can get 50rpm less variance or rule out situations where it does 'unexpected' things it's fun for me. HOWEVER If you just let a tuner give it a guess for a couple of hours and had no way/desire to test and tweak it yourself you'd spend a lot of money at the tuner or be pretty frustrated, that's for sure. But yeah. Drives great. (then I drive partner's Civic Type R and I think.. well, more tweaking to do) But for what it is (cam, TB, intake, manual etc) it does commute around really great once you figure out how the idle tables and GM's systems intend to work.
    • I usually source pressure on inlet manifold after throttle body
    • Where is the best location for boost pressure source when running mac 3port boost solenoid?  my new turbo does not have a fitting for that on the compressor housing.  how come Garrett make a turbo without that?  im confused 
    • From my memory, which isn't that great, we did have issues getting the large throttle body on my old LS1 to play nicely at idle, first it would stall, then it would only idle at 2k rpm, then it would hang at 2k rpm for a few seconds and then drop and stall, then, finally, the best we got was it would hang at 1.5k rpm for a few seconds then drop to around 800 rpm The tuner stated that large cable throttle bodies are a PITA, and if I wanted anything better than what we ended up with I would need a electronic throttle body and all of the aftermarket ECU stuff to run it
×
×
  • Create New...