Jump to content
SAU Community

Recommended Posts

Hay guys i was talking to a guy at autobarn hehe =)

iam getting one of those oddessy dry cell battarys 12V 1000 amp =)

and i was telling what kind of sound system i was putting in my car and he goes you should give your distributor a good service

bushes etc?

what did he mean by this? does it cost a lot to do this? and how does it help me lol =)

Thanks =)

Link to comment
https://www.sau.com.au/forums/topic/7461-distrubitor-battary-and-sound-system/
Share on other sites

I have no idea why they would say that. Distributor is related to ignition so unless your car is not performing properly then I wouldn't bother.

Only time you ever think about the distributor for audio purposes is interference where you simply hook up a $2 condensor (which is usually there to begin with anyway!)

Just out of curiosity, what are you putitng in (don't need detailed description unless you wanna provide it).

It is actually possible to kill an alternator with a big stereo. If you crank your stereo and the headlights dim, your alternator is copping a workout. I would consider a battery upgrade (which you no longer need :mad: ) and a capacitor.

I've seen a few of them dead from extremely high current draws. I don't know the physics of it all but I believe it's due to the stereo sucking huge power from the battery, then the battery loading up the alternator to replace that draw. When it happens a couple of times a second for minutes/hours at a time repeatedly, it's easy to see how this is not "a good thing"...

A capacitor (cap) is basically a very fast-acting battery, ie it stores charge, but can discharge this power much quicker than a conventional battery. The kind you'd use for a stereo installation is a much larger version of the caps you'll see on pretty much any electrical circuit.

  • 2 weeks later...

I've seen 'em those capacitors - always seem like a bit of overkill unless you are building some $10k monster system.

I dunno - i think the new battery is overkill and you might have got talked into it when not really required. It seems like a fairly standard system. Its not like you are running 3 x subbies, 3 amps, and 8 speakers or something.

The alpine amp shouldn't draw too much power, and even the sub shouldn't stretch it.

hehe thanks for the info

reason why i need a dry sell guys is becoz the battary has been moved from the engine bay to the boot and i cant have any hydrogen gases being released from the battary into the boot not legal i think so i had to 2 ways

1. i some out make a duck that lets all that shit out under the car

or i buy a dry cell

so my answer was dry sell hehe =)

they costing me about 300 to 350

guys the best battery i have encountered are the optima yellow top batteries they shit all over the oddysey for stereo use and no cap required the dump huge amounts of current but more impatrant is theyr AH rate is more than double the nearest oddesey equivalent

eg optima yellowtop CCA 950A

AH 95

oddysey 1200 CCA 1200A

AH 40

this basicaly means that the optima has more than double the storage capacity of the oddyssey.

an amp which produces 1000w rms draws approx 170A from a 12V source

the oddesey will last about 15 minuites at this rate with the car off

your altenator in a skyline produces 95A and thats above 2000RPM

at idle its only about 30A - 40A

you do the math as to which is the better battery

NOTE : the standard skyline battery is rated at 45AH

most proper battery retailers should have them.

in nsw i get them from battery world

just lookup your yellow pages

cost was about $400 but well worth it

iv got 2 amps hooked imto my setup about 1300w worth

and my dash lights never dim even with all headlights and tail lights on.

well i was speaking to this guy today about battary

and i told him i would be running 1000 ampliefer etc

and running the battry into the car i said i was planning on getting a dry cell

he goes you will kill it if you run your system and the car togeather

i said iam not ganna be running the system on while the car is off

he goes dosnt matter hehee.

and i was speaking to him in regards to standard hydrogen battarys and he said dont matter if they in boot no harm ?

so what you guys think

he said i should put a small battary in the engine bay for the car

and another battary in the boot for the sound system

etc

what you guys think?

or reconmend i should do

for starters...sounds like you talk to autobarn people too much...the only time they should speak is when you ask for a price...thats it...they try to put accross the image they know lots but they dont...(learnt from experience, and no, im not happy with them)

if this guy wasnt from there, well, he still doesnt know much and shouldnt be giving advice.

my 2 cents..

i recommend an oddessy. it did me well - 2 10's, 2amps, 2 sets of splits (all average power ratings) and it showed no sign of power loss ie. lights dimming while running. just make sure you use good wires/cables and connect everything well...solder the wires, dont just twist them.

basically in stereo terms, you get what you pay for, just shop around to make sure you arnt getting ripped!

optima's are very good, but maybe over kill for your system (your own choice) as long as your alternator is in healthy condition!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...