Jump to content
SAU Community

Recommended Posts

well this has been covered a lot, and a search can help you with many OPINIONS, but its all up to YOU

comparing stock cars...

difference between R32 gtst and R33 gtst:

R32 is 2.0L turbo, lighter

R33 is 2.5L turbo, heavier

--> as a result, the R33 is slightly faster, but the R32 handles slightly better

then it comes down to looks...

which one do you like better?

I personally think the R33 looks fat and rounded, while the R32 is sleek and more sporty. Others disagree and love the R33 and hate the R32

then it comes to modifications...

do you plan to do any?

From what has been posted on these forums it seems R33's make power a bit easier than the R32's for the same money.

Now, for the insurance...

insurance will be HIGH for both cars. if you are in melb forget the R33 as its illegal to drive on your P's, and any insurance will be voided if you are at fault in an illegal car...

Full comp might be $3k at a guess

3rd party about $700ish at a guess

under parents name? no idea. not good for your rating though as you don't build one when under parents name (i think)

and finally... you are 17 so please be careful on the road with whatever car you decide to purchace.

So if you have listened to the above, then listen to this:

DON'T DRIFT.... pelase! you won't afford the tyres, replacement engine and body parts, and you will damage either yourself or others whilst trying on the street. when you are older and have experience on the road then other manouvers mgiht come into play then.

schumacker didn't drive a ferrari at the age of 17 did he? he learnet first - he crashed, broke bones, learned from his mistakes. then when he was older he ruled the world!

have fun,

Warren.

Link to comment
https://www.sau.com.au/forums/topic/74621-r32-or-r33/#findComment-1369780
Share on other sites

ok well firstly, lookin at your age, and you are still young, and im guessin you are limited in money. so i would suggest a r32, only cause its cheaper.. It all depends on your budget, so let us know how much you wanna spend.. also what are you intentions in owning a skyline, like you want it only for drags, driftin, crusin etc etc??? U said you wanna know which drifts better.. I assume, stock vs stock, a r32..

If you wanna the difference between a r32 and r33, its been covered a billion times, so i suggest you search..

It all comes down to personal taste in the end and your budget..

hmm about insurance, best is to ask the companies.. would be same if u have a r32 or r33.. well also the fact if its a turbo or non-turbo..

hope that helps a little..

Link to comment
https://www.sau.com.au/forums/topic/74621-r32-or-r33/#findComment-1369786
Share on other sites

thanks for the help, your gonna have a good laugh at this i have a daihatsu charade at the moment which is already for sale if ur interested ROFL lol i managed to do the first skid in it the other day which was humerous considering it has 195's on it and im getting my gear changes real quik the only problem is its too slow im thinking more along the lines of a silvia S13 or S14 something rear wheel drive. but a 32 skyline is definately on the cards i have a friend thats selling one and its in pretty good condition ive got too many choices now

Link to comment
https://www.sau.com.au/forums/topic/74621-r32-or-r33/#findComment-1370372
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...