Jump to content
SAU Community

Recommended Posts

Hey, just wondering if anyone has had their car re-trimmed lately.

I'm looking at getting mine (when it finally arrives) retrimmed probably in black or dark grey leather with colored stitching/piping. Its an R32 GTR so front GTR seats, back seat and door trims.

I'd be keen to hear from anyone who has had a retrim done (or an upholsterer even), and get some idea on cost.

So anyone who has had any interior work done(any car, and not just leather) please post here with whatever details you want to leave.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/
Share on other sites

Yeah dude, hopefully. I'll def do the photos too. I have no idea at all either, and my car hasnt even arrived yet so I cant even take it to a retrimmer for a quote, thats why I hoped someone here might be in the know.

I've heard from different people, "Should be around a grand." "My mates mate got his silvia done for 1500, but that was cash man." "You wont get it done for under 2500 cash." I have no idea really, I think maybe between the last two somewhere?

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-1370453
Share on other sites

I was hoping to get some idea from the forum members, but I might go and ask around a bit. Only thing is my car isnt here yet and I don't know how seriously the retrimmers will take me if I start asking questions about a car that for all they know I'm just dreaming about.

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-1372736
Share on other sites

I think I will look at getting my seats retrimmed if/when I get my R32 GTR also

seen an R32 with a cream/off white retrim (red with black bonnet) that looked nice

also one with a blue seat retrim, that looked not so nice :rolleyes:

EDIT: Duh!!, 2 posts ago, it was 2GU UP 2's car :)

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-1373461
Share on other sites

I spoke to a trimmer on Monday and he said that its a pretty well a waste of time trying to retrim the GTR. Reckons the backseat is no probs, but the door panels and front seats are made in moulds or something and put together in some way that makes it impossible to re-do. I can't remember exactly what he said.

He said that every retrimmed skyline he had seen at shows etc didnt look right at all and they never last.

This guys was only a little shop in Kirrawee(South of Sydney), but he is only a few hundred metres from JustJap(where I had been moments earlier and who recommended him as they use him themselves), and he owns an R33 GTST which he had tried do for himself.

What do you guys think? Should I go for another opinion, because I can't really believe this?

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-1386434
Share on other sites

I spoke to a trimmer on Monday and he said that its a pretty well a waste of time trying to retrim the GTR. Reckons the backseat is no probs, but the door panels and front seats are made in moulds or something and put together in some way that makes it impossible to re-do. I can't remember exactly what he said.

He said that every retrimmed skyline he had seen at shows etc didnt look right at all and they never last.

This guys was only a little shop in Kirrawee(South of Sydney), but he is only a few hundred metres from JustJap(where I had been moments earlier and who recommended him as they use him themselves), and he owns an R33 GTST which he had tried do for himself.

What do you guys think? Should I go for another opinion, because I can't really believe this?

Sounds like he doesn't want your business.

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-1386454
Share on other sites

  • 1 year later...

i know its a bit late:) but im a trimmer and yes u can retrim gts seats. you can retrim any seats. ive done plenty of them and they turn out spot on. They are a little more difficult because they are moulded on, that just means u can take em off to use them as patterns, same with most jap cars. all it means is you gotta make your own patterns. its just a bit more difficult and either this guy was shit or lazy.

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-2932625
Share on other sites

i know its a bit late:) but im a trimmer and yes u can retrim gts seats. you can retrim any seats. ive done plenty of them and they turn out spot on. They are a little more difficult because they are moulded on, that just means u can take em off to use them as patterns, same with most jap cars. all it means is you gotta make your own patterns. its just a bit more difficult and either this guy was shit or lazy.

I have leather recaros, what sort of $$ (ballpark) to do just:

- rear seat

- rear door cards (potentially the vinyl part with leather and suede in the inserts)

- front door cards (same)

- potentially and R32GTR vinyl dash retrimmed in leather...?

cheers mate

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-2932980
Share on other sites

  • 2 weeks later...

hey there peeps just bringing this up again.

could anyone give a ruff price on getting my interiour done for my 32GTS-t. i going for black and red, not going for leather.

what i want done is the

rear seats done black with the red inserts

rear sides vinyl done in black with the red card

front doors vinyl in black also with the card in red

gear boot and hardbrake boot in red and vinly dash black

and maybe the roof and visors done in black too

thanks

Link to comment
https://www.sau.com.au/forums/topic/74671-retrim/#findComment-2961167
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...