Jump to content
SAU Community

Recommended Posts

Hey,

I try and do as much as possible to keep my families cars running well.

One thing that I've never been taught is wheel alignment. Seems every so often throughout the year this needs to be done and wouldn't mind knowing how to do this.

So can a backyard mechanic do this? If not, just say no you idiot. If so, please explain.

Many thanks.

Link to comment
https://www.sau.com.au/forums/topic/75489-can-you-do-your-own-wheel-alignment/
Share on other sites

Well...unless you know what you are doing take it somewhere with a 4 wheel laser aligner like most Bob Janes. We tried to do the toe ourselves the other day, thought we had it right (1mm in at rear) but actually had 17mm out ;) not as easy as it looks :rofl:

Wheel Alignments are really important, they have a hge effect on handling and tyre wear.

A $35 wheel alignement will get you a front toe adjustment, if you are really lucky they might do the rear toe as well. Forget about camber or caster adjustments, that isn't going to happen for $35.

We have a camber gauge, 2 pieces of box section aluminium and 2 lengths of 1.5mm hat elastic and I align the race cars with that equipment. But I have been doing it for a lot of years. I couldn't possibly explain it, would take me 10 thousand words or more. Pop out to a race meeting and I can show you though. :cheers:

Thanks for the feedback guys, appreciate it, I'll keep paying to do it.

I also found this great website:- http://www.familycar.com/alignment.htm for anyone else looking on this issue.

Thanks for the offer too SK, I won't trouble you with that, but If you need an extra hand to help out with something at a track one weekend, just PM me, cheers.

my dad did his own wheel alignment on an old ZH Fairlane he had after changing some suspention parts

when he took it down to get it done properly it was within 1mm of being dead accurate (all done by eyesight) the guy at the tyre place couldnt believe it

so it can be done but better to get the pros to do it that way you know its right.

The only thing you could do by yourself would to adjust the tie rods to centre the steering wheel if the steering wheel is offset in a straight line. However this would only be a temporary fix. Doing a wheel alignment by hand should not be attempted by the light hearted and it is definately not easy to do for someone inexperienced in doing it. As SK said it would take too long to explain it over a forum and that the only way to show you how to do it would be in person.

Best off spending that $35 for a wheel alignment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...