Jump to content
SAU Community

Recommended Posts

I rang the guys at Magic Cat today and organised a price of $210 including postage to anywhere in Australia for a purchase of 5 or more cats.

Sorry to the other group buy (PSR), but i need one and i'd rather get it cheaper. Im not making any money out of this so i dont really want to go back and forth with questions about flanging. They are 4 inch, necked down to 3.5 inches. Any exhaust shop will certainly be able to fit them to your existing exhaust with a minimum of fuss.

As i understand these are one of the highest flowing cats around (750cfm), and for this price, you cant go wrong.

There is a thread in Forced Induction Performance that will provide more info on these particular cats. Click below.

http://www.skylinesaustralia.com/forums/sh...ead.php?t=55136

Please dont hesitate to PM or ring me on 0414972596 should you require info about the group buy. If you want to know technical info, ring magic cat on (02)99391644. Im sure they wouldnt mind.

MAGIC CAT GROUP BUY!!

1. ME********PAID**********

2. Kristov *******PAID********

3. Dang-r-us x 2

4. Daemon667 ********PAID********

5. GTST25 **********PAID***********

6. Geordie *********PAID********

7. dojobi *******PAID********

8. Neo_R34 ************PAID***********

9. GTR R32 x 2 **********PAID*********

10. Fastrotor ************PAID***********

11. Iwells *********PAID************

12. j-plus ********PAID*********

13. shift_tea *******PAID*********

14. R3AP3R **********PAID**********

15. HKS-R33

16. BOOSTD x 2 **********PAID**********

17. GTR STI *********PAID*********

18. razOr$harP ******PAID********

19. Shaolin **********PAID********

20. TimmyC **********PAID*********

FOR PICTURES, CLICK BELOW: (THANKS YOGIOOO!)

http://www.skylinesaustralia.com/forums/at...achmentid=38171

http://www.skylinesaustralia.com/forums/at...achmentid=38172

Link to comment
https://www.sau.com.au/forums/topic/75711-magic-cat-group-buy-2-210-delivered/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

I really dont know. I depends on how many people sign up! Theres already 3, so we only need 2 more!

i'll be in for one :(

Any chance i can get it before the 10th? I need it desparatly as me car needs its new exhaust by the 10th....

IMkeen just gotta measure my exhaust....might be to small :(

Likewise: I assume measuring the outside dimension is adequate? Any idea on the costs of getting it flanged? Will you be going ahead as soon as you get five people, or is there a cutoff date?

Lucien.

I dont know how much it will cost to get it flanged.

Retail price is $300 + postage, so youre saving about $100 probably.

There is no cut off date, but ill order them as soon as i get 5 people. I have about 7 already, so as soon as i get money into my account ill order them. Please understand that im not handling the cats at all. Im just providing Magic Cat with the money and addresses of the group buy members, and they'll package them up and send them out.

When you deposit the money into my account, send me your full name and postal address via PM, as confirmation of the deposit.

I hope to order them as early as Monday or Tuesday if everyone is diligent with deposits. Internet deposits are best.

Shaun.

Gday guys,

Im hoping to order these cats on Monday or Tuesday depending on speediness of deposits, so your cooperation is appreciated. PM me if you want in and ill reply with my bank details etc.

When youve deposited the money, dont forget to PM me with your full name and postal address as confirmation of the deposit. Ill then wait till all money is in my account and deposit the funds into Magic Cats account. ill fax them your addresses and they can take it from there! Hopefully youll have the cats next week.

Shaun.

P.S. Bl4cK32. Realistically, i dont like your chances of getting it by wednesday, unless you pick it up. Theyre on the Northern Beaches of Sydney.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...