Jump to content
SAU Community

Recommended Posts

Yes, my baby has arrived..

Just thot i'd show ya's all..

http://members.optusnet.com.au/darrchan/Ce...Ceffy/Ceffy.jpg

She's sexy, she purrs nicely, she gets nasty when i drive her hard..

One question if anyone knows, how da hell do u take da MOMO Boss Kit off?

It's one of these..

http://members.optusnet.com.au/darr...fy/boss_kit.jpg

The problem is that when driving straight, the steering wheel either points 45 degrees left or right.

Can't adjust with the 6 screws cos it'll just point 45 degrees left or right..

Don't think wheel alignment is the problem cos it doesn't pull left or right when driving straight.

I unscrew the 6 lil bolts on the steering wheel..

Disconnect the plugs for the horn..

Unscrew the big mutha of bolts in the middle..

But the big black metal thing still won't come off..?

Link to comment
https://www.sau.com.au/forums/topic/75744-my-mail-order-bride-has-arrived/
Share on other sites

looks very nice!

The interior looks better than the herringbone stuff

eek in that photo of the driverside interior, wats that in the botom corner of the door sill ? have you checked her out for rust spots?

looks very nice!

The interior looks better than the herringbone stuff  

eek in that photo of the driverside interior, wats that in the botom corner of the door sill ?  have you checked her out for rust spots?

I belive that is the upspec interior? I have the same stuff, its heaps nicer!

Looks pretty clean man, should enjoy it heaps.

all the mods are pretty much just what u see..

no aftermarket turbo.

well spotted.. that IS rust on the driver's side door.

but that has now been repaired and passed Regency after 2nd inspection.

coming from an understeering FWD Turbo Laser to this will be a whole new world...

can ya'll tell me if u come across an Online instruction manual or sumthin for a MOMO Boss Kit?

Hey DC......nice ride dude! Another cefiro to grace the land of Oz.

Just noticed a couple of things......i think u got the same rims as mine...( see pic below ) urs 4 stud? Also as i insepected mine today, i noticed something...being that most cefiros, have had a auto - manual conversion such as mine and urs......there are those 2 buttons on the center console, 1 for the aerial and 2nd for the automatic power selection ie power/normal/snow. You can see them in your interior pic, just to the left of the handbrake.

Obviously this 'power' button is useless, dduuurrrrr, but was wondering if anyone knows where the wiring runs to as the button could come in useful for other applications......boost, fogs, omg NEONS...fully......lol etc.

BTW DC does ur electric aerial button work?? lol mine doesnt ahahaha

anyways......top stuff!!

Ando

Hey DC......nice ride dude! Another cefiro to grace the land of Oz.

Just noticed a couple of things......i think u got the same rims as mine...( see pic below ) urs 4 stud? Also as i insepected mine today, i noticed something...being that most cefiros, have had a auto - manual conversion such as mine and urs......there are those 2 buttons on the center console, 1 for the aerial and 2nd for the automatic power selection ie power/normal/snow. You can see them in your interior pic, just to the left of the handbrake.

Obviously this 'power' button is useless, dduuurrrrr, but was wondering if anyone knows where the wiring runs to as the button could come in useful for other applications......boost, fogs, omg NEONS...fully......lol etc.

BTW DC does ur electric aerial button work?? lol mine doesnt ahahaha

anyways......top stuff!!

Ando

hrmm.. lookin thru my window at work now.. nup. can't see how many studs the wheels are.

i know they're SSR ones..

only got it last night so haven't looked thru the car thoroughly.

my aerial up/down thing works, but only when u switch the radio on the headunit on/off.

the switch doesn't work.

but some fcker bent the top section of that retractable antenna.. maybe i can bent it back so it fully retracts again..?

in regards to that power selection button, i say... 'Eh??'

i've seen it, haven't chked it out yet..

gonna wash the dirty bitch tonight and look at it closer..

muh wheel's are 4stud.

also just noticed the centre caps are missin!!

and thx for the tips on taking the boss kit off, a mechanic told me exactly the same - to use the steering wheel to pull it off. and i have to wind the seat back cos u sometimes have to pull so hard that ya go flying back..

DC - Yeah man thought so...i have exact same SSR wheels 4 stud on my cefiro......looks like u'll be up for the GTS-T converstion aswell BAH!!!

As for the center cap......i dont know if they ever were supposed to come with any........don't quote me on that thou! The center thing is quite ugly.......got like a cerated tooth looking tubeular thingy...lol...great description.....

make sure you put the nut back on slightly before you start pulling at the wheel....have seen guys rushed off to hospital due to a steering wheel to the face...

nice car by the way...

cheers

Linton

make sure you put the nut back on slightly before you start pulling at the wheel....have seen guys rushed off to hospital due to a steering wheel to the face...

nice car by the way...

cheers

Linton

Haha I forgot to tell him the most important part Linton!

yea, that's right.. i would've been driving it at Mawson Lakes.. i work there!! =D

haha.. u guys have obviously taken steering wheels off before.. my mechanic friend said exactly the same thing - put the big nut back on slightly..

but i still can pry the b1tch off..

oh well.. i'm going overseas on holiday tomorrow, have to start learning to drift when i get back..

hey i saw that car on all the import sites it looks very nicely modded not too thrashed either!

you both have SSR full reverse / formula mesh rims, they are worth a lot of money, not sure if they are still in production

one day i want to buy a set of SSR SP-1 rims, they are drool tastic,

and if that's the upspec interior, i have it too! i have the most pimped out factory ceffy in australia i beginning to think

upspec interior

front lip (nobody else has my lip!)

hehehehehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...