Jump to content
SAU Community

Recommended Posts

I've been following this issue on my R32 for sometime now ever since I first got it.

Basically the HICAS light comes on after I travel a certain distance. It has made me wonder because it doesn't come on after a certain period of time but a certain distance everytime after first travelling in my car. Leave it to rest for a while and it resets itself and the same thing will happen again. Also I have no clue about HICAS diagnostics either.

One thing I have found though, is that my HICAS never actually seems to work. And I've never actually had the 4WS kick in on me before. But the thing is that I don't have a locker bar because all the lines still connect into the rear steering rack and there doesn't seem to be any tampering with the HICAS ecu at all.

Is there any dodge way of eliminating the HICAS? Removing fuses? Cutting/crossing wires? Also people with the lock bars, does the HICAS light come on at all times or something similar to my case that after it travels a certain distance the light will come on?

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/75923-timed-out-hicas-issue/
Share on other sites

Scott, it would appear that your steering wheel is not centred (I'm guessing an aftermarket wheel) so the HICAS goes into disabled mode after about 6-7km. There is a sensor in the steering wheel to tell the HICAS where it is pointing and if it is not centred/doesn't move when driving it shuts down HICAS.

For more info on HICAS go to the tutorial in my sig.

well my boss kit is the right opne it fits straight on,.,,.. i think its the steering wheel isnt dead centre problem and i need an alignment... so if i just adjust my wheel so its perfect straight this will fidx it>??? i still dont see how just taking the steering wheel off affects the sensor.. damn nissan

I too have the same problem, but not after any set time or distance.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered.. :confused:

I too have the same problem, but not after any set time or distance.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered.. :confused:

I too have the same problem, but not after any set time or distance.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered.. :confused:

I too have the same problem, but not after any set time or distance. My handbrake light does the same. Neither everyday, nor at the same time, just every so often. Before you ask, yes my h/brake is all the way down.

I asked a mechanic who also owns a 32 and he put it down to a dodgy solonoid or to that effect. It started happening to me after about 3 weeks from purchase, since then I have changed my after market wheel twice. Made no diff, will follow this thread with interest, wiered..

:confused:

you can disable the HICAS by unplugging the KYB motor located in front of the rear steering rack. I would advise against it as it makes steering much heavier. You will know if the 4WS has been working or not because of the difference it will make once you unplug it. The light may stay on constantly though, can't remember.

The problem has been covered a hunred times :cheers:

Your problem is likely to be:

a) A lack of powersteering fluid.

B) An incorrect boss kit.

c) An incorrectly fitted boss kit.

Just because the boss fits, doesn't mean its the correct one. You need a boss with holes for the HICAS lugs offset at about 2AM and 8PM: see this tread:

http://www.skylinesaustralia.com/forums/sh...&highlight=boss

I also had an issue with the piping on the powersteering resevoir coming loose. I pulled the hoses up as high as possible (which was bloody hard) and then replaced the standard clamps with ring clamps.

Lucien.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...