Jump to content
SAU Community

R34 Exhaust question

mxtcy

By mxtcy,
in South Australia

 Share

Recommended Posts

mxtcy Proficient

mxtcy

Posted
Posted

HEy people, i don't know where else to post this (i only check the SA section and for sale), so if it's the wrong spot i'm sorry.

I have a mate with a R34 GTT 2 door and he has offered me his aftermarket exhaust which is everything from the dump pipe back, so will have to bolt onto stock dump pipe. Now i have a R34 GTT 4 door. So I am wondering will this exhaust fit my car?? Will it need any mods to make it fit etc??

Thanks in advance

Sean

Link to comment
https://www.sau.com.au/forums/topic/76372-r34-exhaust-question/
Share on other sites
Nightcrawler Grand Master

Nightcrawler

Posted
Posted

I am sure any exhaust workshop that is half decent could modify the exhaust to make it fit. Wouldn't cost you much at all, I would think. Go ask someone like Everlast at Ridgehaven. I was told that the 4 door exhaust is only 40mm longer than the 2 door one, but mount points are different - this is very easily recified though!

Then you can sell/loan me your stocker :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...