Jump to content
SAU Community

Recommended Posts

What are the differences between a R34 GTR M-Spec and V-spec? What is different from a V-Spec to a V-spec II, what did they change? Is the only difference from a plain jane R34 GTR to a Vspec the suspension and the diff like the R33 GTR?

Can anyone confirm what Nür means, I assume it has something to do with nurburgring, and i read somewhere that you get N1 engine and turbos.

I've never really take an interest in R34s until recently, and was wondering why a plain R34 GTR goes for like 65 grand when, I recently found a R34 GTR Vspec II Nür forsale in japan and it was going to cost like 130 grand by the time it got here and was complied.

V-Spec:

Brake cooling air guide

Front diffuser and rear carbon diffuser

Active LSD and ATTESA-ETS Pro

Harder suspension

Updated tachometer

V-Spec II:

Same extras as V-Spec but based on the "series 2" BNR34 which included

N1 rear calipers on whole GTR range

Aluminium pedals on whole GTR range

Revised interior colour scheme (series 1 grey cloth, series 2 black cloth) on whole GTR range

Revised centre console colour scheme (series 1 gold, series 2 illidium)on whole GTR range

Clear front and side indicators on whole GTR range

Carbon fibre bonnet with NACA duct on V-Spec II

M-Spec:

Based on V-Spec II

Leather interior

Front seat heaters

Special ripple control shock absorber

Special rear stabiliser bar

Fine grip type steering wheel with gold stitching

Aluminium bonnet (optional carbon fibre with NACA duct)

Exclusive body colour

Limited edition of 50 per month

V-spec II Nur & M-Spec Nur:

Based on either V-Spec II or M-Spec with following additions

Limited edition of 1000 build only

N1 turbochargers

N1 engine block

N1 pistons with weight balancing

N1 piston rings

Weight-balanced conrods

N1 oil pump

N1 water pump

N1 exhaust manifold

N1 intercooler piping

Exclusive cam cover colour

Exclusive gold VIN plate

Exclusive rear emblem

The Nur was the last of the last R34 GTR's to come from Nissan, and the last produced RB26DETT's, which is why you pay a premium for them. You can see on the above list of modifications why V-Spec's and M-Specs command a higher price than normal GTR's.

Build figures of each are:

Standard GTR: 3,169

V-Spec: 4,619

Nur: 1000

amaru is spot on .

A couple of things to add to though .

All v-specs + m-specs have 2 extra functions on the mdf , i/cooler temp and exhaust temp .

M-specs have heated external mirrors as well as heated seats .

M-specs made from may 2001 on .

I don't know the biult number for m-specs but all up about 1300 including nur m-specs .

M-specs have bigger battery as well as bigger terminals .

  • 9 years later...

Thanks Guys this has cleared up a lot of things for me too as I am in the process of buying a R34 M spec Nur as I thought someone was trying to sell me a V spec Nur with a M spec rear emblem. Just one more thing, what about the seats I know they are leather and heated on the M spec Nur with yellow or silver stitching, but does the M spec Nur have the same leather seats as the std M spec ?? I think all that does change is the stitching colour I think, on the std M spec its just black stitching as per leather colour ?? . For example heated leather seats with the GTR emblem embossed near the top of the seat below the head rest and black stitching is std and all the M specs and just the colour of the stitching changes on the M spec Nurs ?? Sorry if this question is a little confusing.

  • 5 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...