Jump to content
SAU Community

CruZ to Wollongong 29/12/02


Recommended Posts

  • Replies 89
  • Created
  • Last Reply

Top Posters In This Topic

broken, will be there till around lunch dude...

dawn run crew will be leaving BP/Hungry Jacks cnr of King Georges Rd and Punchbowl Rd Lakemba by 7:30am. going to Sanden Point via the National Park...

will be heading into Wollongong around lunchtime, or just after for some food and to meet up with the other SAU'rs.....

IN.

havent been on a cruise for a while & the 12 o'clock start time suits me perfectly...

and yeh, is there anyone who can donate a passenger seat to this guy from the states? (give him some lasting memories of Skylines to take home with him... :D)

-Haydn

Originally posted by Mr 20Valve

IN.

havent been on a cruise for a while & the 12 o'clock start time suits me perfectly...

and yeh, is there anyone who can donate a passenger seat to this guy from the states? (give him some lasting memories of Skylines to take home with him...  ;))

-Haydn

Me and rowan will take care of that c-ya at 12 :D

when you guys get to the gong, where will you all be? north beach car park???

Yep. North car park on the north side of the park.

We should cruise out to get photos from there.

what do you think?

:D




  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...