Jump to content
SAU Community

Recommended Posts

Do you want to have your hearing impaired ?

Do you like it when it feels like your ears are bleeding ?

Well if you answered "Hell Yer!" then this is right up your ally.

2 x Kicker (F12c) 12" Competition Class Subs in a custom enclosure.

The box is made from 3/4" MDF and is internaly braced and sound deadened. The box has been built to Kickers exact recommended specifications, it is divided in the middle to give each sub its own internal airspace of 1.75 CuFt and are both ported by a 4" tube port.

The box features a gold plated quick connection port for each sub on either side of the box which is connected by Stinger 10 gauge speaker wire & gold terminals. It is carpeted and both have a Kicker removable subwoofer grill.

Each sub is 4ohm svc (single voice coil) and is rated to take 400w RMS peak, or 200w RMS continuous.

The subs can be linked together to run off one channel.

If they are linked in parallel it will drop ohms to a 2ohm load so you amp has to be 1ohm stable.

If they are linked in series it will increase ohms to a 8ohm load.

The enclosure dimensions are:

Width = 31"

Height = 13"

Top Depth = 17.5"

Bottom Depth = 21.5"

The subs have never been run in a car.

When i brought them I ran a 4hr break in procedure which was done on a test bench and involved varying freq tone steps.

A very regretful sale .... $550

Link to comment
https://www.sau.com.au/forums/topic/774-kicker-subs-in-enclosure/
Share on other sites

It was goin to go into my hx kingswood, but i didnt manage to get that far, im too fussy and i wanted to custom the boot b4 it when in, but i ended up giving up on the car after i found rust in the rear quarter panels.

Haha, Prank you remember aggess ago a guy in Sydney from SDU was selling a sound setup with 2 x 12 " MTX boxed subs, pioneer splits, etc etc .... and you were after the subs ? I was the guy who purchased em, but I still havn't tried fitting them in the boot :) Maybe today is the day !!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 1994 Series 3 R32 GTR. Freshly built as the perfect weekender. Has many brand new Nissan OEM pieces (some you can no longer source). Last serviced (April 2024) at V Spec Performance, Melbourne, Australia. Feel free to DM me if any questions. Asking price: $190,000 AUD.  Engine RB26DETT Original 05U block Factory R32 crankshaft CP 86.5mm forged pistons Spool forged rods Factory cylinder head – rebuilt Factory valve train Factory camshafts Factory inlet manifold Factory throttle body Garrett dash -5 turbos Custom intercooler piping with Plazmaman clamps Plazamaman 100mm race intercooler Turbosmart BOV Tomei fuel rail 660cc injectors Goodridge 9000 series fuel lines with crimped fittings Stainless steel front pipes Tomei titanium exhaust with stainless steel cat converter Spit fire coils Powder coated rocket covers New Nissan coil pack emblem badge Fully repainted engine bay in Factory Black Refurbished ABS unit New Nissan brake master cylinder New Nissan brake lines New Nissan clutch master cylinder New Nissan washer bottles Custom catch can (powder coated with Goodridge lines) Steering rack rebuilt New Nissan power steering lines New Nissan AC lines A/C compressor refurbished AC condenser refurbished HPI radiator and new thermos fanes New radiator fans NOTE: All nuts, bolts, fixings new or zinc coated Driveline Factory 5 speed gear box rebuilt Xtreme twin plate clutch Stainless steel clutch line Rebuilt factory transfer case Custom one-piece tail shaft Rebuilt factory front diff Rebuilt factory rear diff Suspension HICAS deleted Bilstein dampers IKEYA formular front and rear arms and tie rod ends New bushes wherever possible Whiteline anti roll bars (underneath car only) Brakes Brembo F50 front callipers – 4 piston AP racing 380*32 front rotors, J Hook design Custom floating hat and calliper mounts Brembo 4 piston rear callipers PFC pads Stainless steel braided brake lines Body New Factory Black paint job Ceramic coated exterior panels New Nissan aluminium bonnet (super rare) New Nissan headlights (super rare) New Nissan indicators New Nissan front bar New Nissan front lower lip New Nissan head light and bonnet seals New Nissan windscreen cowling New Nissan wiper arms and wiper blades New aftermarket windscreen New Nissan windscreen seal New Nissan front doors window surrounds and seals New Nissan rear quarter windows (must replace for proper paint job) New Nissan rear window surrounds and seals New Nissan side skirts New Nissan boot badges New Nismo rear bonnet lip New Nissan guard liners Interior New Nissan lens cover over cluster New Nissan gear boot shift New Nissan gear knob New Nismo steering wheel New Nismo floor mats New Billet Handbrake lever New Nissan OEM pocket facia to replace radio Underbody Original stone guard removed and new stone guard coating applied Powder coated front and rear cross members Fuel lines painted to match factory colours Fuel tank removed, cleaned, repainted and refitted All nuts and fixings cleaned, repaired and zinc plated Wheels Rays/Volk racing TE37 18 x 10.5 + 15 in Bronze Yokahama A050 265 x 35 x 18                         
    • @Supernanoyour car has ended up in my hands and I was wondering if there has been any work done to the motor?  
    • Sigh... yeah OEM mount rear battery, very R33, very demure, very mindful.
    • Would need a substantial current draw in the car to make a bunch of sparks. Obvs to now test resistance to ground of the car's B+ lead. If there's a short there, you'll see it. Only likely place for that, as you suspect is alternator. But there is also the possibility that rats have had a chew on some insulation. Shitbox has the battery in the boot, yeah? Plenty of cable to attack.
    • Oh, I thought of that too... I disconnected the battery and hooked up the leads direct to the car without the battery in place. Sparks... I suspect the following: Alternator has decided to kill itself Starter has decided to kill itself I'll recharge the battery, then unplug both, and go from there. The above might take 6 months - however I did buy a Victron 15 AMP trickle charger, apparently it's better than CTEK? Amazon, delivery by tonight. https://www.amazon.com.au/Victron-Battery-Charger-15-Amp-waterproof/dp/B07P4LMMMD?ref_=ast_sto_dp    
×
×
  • Create New...