Jump to content
SAU Community

Recommended Posts

hello, i have a forward facing plenium for sale.. it suits a rb20det ecc. It made over 300 horses @ the wheels with no problems. Its completely polished and in great conditon. I have pictures emai [email protected]

its basically the standard maifold with the throttle body moved to the front of plenium.

280 ono

Cheers justin

*****PICS FURTHER DOWN THREAD*********

Link to comment
https://www.sau.com.au/forums/topic/78115-rb20-forward-facing-plenium/
Share on other sites

  • 4 weeks later...
sorry guys.. finally got pictures.. had a heap of interested..first in best dressed..suit a ECC aswell

Cheers guys

Justin

0422944604 if you keen

Justin

Hey mate, Im very interested

SMS sent

  • 1 month later...

wer does the accelerator cable hold onto ?? if you look @ one of the photos above..there isvacume pipe which has fallen onto the accelerator holder cable thingy..if you take a close look you will understand me..otherwise give me a buzz on 0422944604 and ill explain it bettter

were there any vacum lines blocked or removed? no all used

let me kno!

where u at? im in perth..no problems sending over east

Cheers justin

Edited by hurtinit
  • 1 month later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...