Jump to content
SAU Community

***Theft warning for all R34 owners***

666DAN

By 666DAN,
in Queensland

 Share

Recommended Posts

666DAN Grand Master

666DAN

Posted
Posted

Something that has come to light during the recent week, R34's are currently being targeted by thieves.

I'd urge everyone to re-evaluate any alarm system their cars have and put in place any effective means of keeping the car secure.

You should all assume that your keys are available and have been copied, this is the general idea of what security measures are required in the future.

Good luck!!!

Link to comment
https://www.sau.com.au/forums/topic/78155-theft-warning-for-all-r34-owners/
Share on other sites
666DAN Grand Master

666DAN

Posted
  • Author
Posted

QLD specific in my case, but it still pays to be aware who could possibly have a copy of your keys and intimate details of your car, remember in everyones case, someone has had your car before you get hold of it.

dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted

I gota admit, I thought I was over protective of my car by a long way. Seems not. Its rarely out of my sight, or someone I knows site. Always locked, everything always covered. Parked away from other cars so they dont run in to it, open doors on to it, but not so far away that anyone can break in without been seen. I always put the factory steering lock on too. Seats back over amps. Rug over cds etc. Steering wheel cover just to cover up its a sports steering wheel. Anything to make my car just that little bit less attractive over the car next to it.

I think my mechanic is the only one who could steal my car. Trick is, he would do his arse if he did :thumbsup:

Oz Grand Master

Oz

Posted
Posted

The Best Way to stop some one is put a good set of locks on your car.

I swear by these locks, I have had them on most of the cars that I have owned.

Click the lock to see the latest Solex Range of locks.

:lock:

Oz Grand Master

Oz

Posted
Posted

all sets of the locks come with 4 keys 2 normal use one with a light in it & a emergency/master key, the master key is only for the 1 set of locks, each set of locks is different. Trust me I have had about 5 cars with them still on lol & ended up keeping the emergency key once or twice.

Oz Grand Master

Oz

Posted
Posted

Well its really easy to code normal locks, hell I could do a standard lock with my eyes closed.

(another thing that could of been done is all the locks have a similar lock profile but vary enought to stop one secondary key being used on another lock, meaning the master Primary key will cover the whole 200 locks, I thinks thats right lol)

But the solex locks are another story all together.

Whats the key look like on the end????

Oz Grand Master

Oz

Posted
Posted

lol thats why adrian the locks you must have at work drop a pin in the middle of the lock allowing the key to push the full set of code tags out of the way that the only way I can think it would work as for the normal ones there solid centers & there for single set coding :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • djr81
      R32 update from 1990's spec.

      By djr81 · Posted

      So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • djr81
      RB26DETT Sketchy boost mod?

      By djr81 · Posted

      Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...