Jump to content
SAU Community

Recommended Posts

Guest Boxhead

ive been using the search feature, and well, i have found stuff on tyres, but most of it is what tyrs do you use for drags etc.

Basically i want to know what are good all round tyres, as in not the cheapest malaysian specials, but as most of us cant afford the ultimate in stree legal drag tyres etc.

for stock 16's for r32 and r33, what are the best performance for yoru dollar, as in around $600-$750 a set of 16's...

also what price did you get them for if you got a set...

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/
Share on other sites

Guest Boxhead
Originally posted by skyline33

have you thought of getting good second hand tyres

yeh i will do that one day, but as my car is soon to be complied, i thought i may aswell just get decent tyres for compliance, rather then buy el cheapos for that, then buy some good second hand tyres.

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115466
Share on other sites

are the Dunlop FM901's a bit too good for what u want?? I've heard heaps of goods things about those.

And some sort of Falken tyres i think...i've never really looked into it as i've only got a pulsar with like 2inch hubcaps, so tyres have never really been an issue :D

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115470
Share on other sites

Guest Boxhead
Originally posted by SS8_Gohan

are the Dunlop FM901's a bit too good for what u want?? I've heard heaps of goods things about those.

And some sort of Falken tyres i think...i've never really looked into it as i've only got a pulsar with like 2inch hubcaps, so tyres have never really been an issue :D

i could be wrong, but when i was in a tyre shop with a mate, the guy was telling me these are not made anymore, and the new top of the range the ss01 or whatever they are , were made to replace, and i think with my budget i could have 2 :S

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115471
Share on other sites

Guest Boxhead
Originally posted by DON91E

bridgestone POTENZA's??

the were the standard tire on the S15, i like em, i reckon they have been the best tire i have actually USED yet...

Also the SO1's or SO2's or wateva there called dunno who makes em ccan't remember...they were the standard tires on the S2000

Donnie

yeh but how much do these cost?

thats what im really looking for. cost and also how you rate them..

its one thing havin a salesman telling you how good they are :D

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115479
Share on other sites

DON91E/Boxhead,

There are many types of Potenza's ranging from hard compound throught to the very soft and sticky R rated tyres. The R rated tyres will only last 5-10,000 km's, so for daily driving aren't very practical if money is an issue.

There are many good tyres available from the top manufacturers. I use Toyo TPG's, have used Falken's and Grid II's. The Toyo's are the best, by far, but also cost the most, the Falkens are good, the Grid II's have a very hard compound so last ages but have a lack of grip.

Each tyre shop you go to will have there favourite top of the line tyre, where thay make a large markup on, so don't be too pursauded by there opinion.

I like the Toyo's as they give grip with moderate road wear, but for racing/drags then I'll be using the Potenza R's.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115480
Share on other sites

Guest Boxhead
Originally posted by GTS-t VSPEC

DON91E/Boxhead,

There are many types of Potenza's ranging from hard compound throught to the very soft and sticky R rated tyres. The R rated tyres will only last 5-10,000 km's, so for daily driving aren't very practical if money is an issue.

There are many good tyres available from the top manufacturers. I use Toyo TPG's, have used Falken's and Grid II's. The Toyo's are the best, by far, but also cost the most, the Falkens are good, the Grid II's have a very hard compound so last ages but have a lack of grip.

Each tyre shop you go to will have there favourite top of the line tyre, where thay make a large markup on, so don't be too pursauded by there opinion.  

I like the Toyo's as they give grip with moderate road wear, but for racing/drags then I'll be using the Potenza R's.

See'ya:burnout:

once again i see no mention of actual prices.

but thanks for the tips..

im liking the toyo's, but have to go aruond window shopping and asking for prices i guess, but with my car still in japan. it makes it hard.

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115485
Share on other sites

Boxhead,

It is difficult to put prices on tyres as I run 235/45/17's and 255/35/17's. My friend also owns a tyre store so I get it discounted from the retail price. It is definately worth going to a few places as the price difference can be quite alot.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115486
Share on other sites

Guest Boxhead
Originally posted by slip

901's would be good for you boxhead.

G Grids are ok.

Dont get 2nd hand.  If you can lose it under power in a non turbo auto, you should really invest in good tyres.  speak to LOTS of tyre shops.

215/50 R16's = good size if it has stock wheels.

yeh, im liking 901's but i will have to investegate into the price side of things a bit more..

to me tyre shops is about selling, not advice, hence i asked on here :D

i put that crash down to my stupidity on a wet and greasy road, not tyre choice or power or lack of power in the car.

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115604
Share on other sites

Originally posted by Sumo

I got a set of Nankang 245/R17's on my R33, cost me $200 each.... They are ok when your on a budget after you've just bought a car :P

Cheers

Sumo

Hey Sumo, be wary of the Nankangs. They are okay when new but once tread gets to about half way they go off really badly. I had some on a Celica and they were terrible, no grip at all once the new tread started wearing. Being FWD the understeer was shocking - dry or wet it didn't matter.

I have Simex on the R33 but too early to tell how they are although again whilst new they are great. Go with others suggestions on the forum if it isn't too late to change your mind. The Simex I got are 235/45/17 and were $200ea.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115758
Share on other sites

I agree with Red Sky II, the Nangkangs I had on the back of my Skyline turned to shit after 50% tread, they are cheap for a reason. It is worth the money to get something good, you'll have heaps more traction and much better in the wet.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7908-tyre-selection/#findComment-115833
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
×
×
  • Create New...