Jump to content
SAU Community

Judgement day of the skyline

4PKNUP

By 4PKNUP,
in Australian Capital Territory

 Share

Recommended Posts

4PKNUP Enthusiast

4PKNUP

Posted
Posted

Well early i got my car impounded and i put a forum on it so i thought i would keep everyone posted about what happen. I went to court yesterday and i got my car back!!!!!! no words could say how happy i was and because i pleady guilty they did min on everything so all i got was suspention of lisence for 3 months and 100 dollar fine and my car back half an hour later. So thanx for everyone who gave me advice with it much appricated!!

Link to comment
https://www.sau.com.au/forums/topic/79113-judgement-day-of-the-skyline/
Share on other sites
Talej Rising Star

Talej

Posted
Posted
In my experience, you're not a good driver until you've had your licence suspended at least once.

That would be assuming you learn a lesson from the suspension. I know a few people that have had multiple suspensions and still haven't learnt their lesson... and I know some people who have never even been caught speeding and are far better drivers...

oscar32 Mentor

oscar32

Posted
Posted

No, a sensible drive will never loose their licence - mind you with the way speeding cameras work you can loose it without every doing anything wrong.

That said, very lucky 4pknup :P

Terminal Grand Master

Terminal

Posted
Posted

i was caught speeding over 15km/h, but the thing that lost my licence was that my rear P plate had been taken off by my mates thinking it would be a funny practical joke. i don't think any sort of driving could prevent that. the cop was just a bastard and wanted to take me to town because i was driving a 30yr old V8

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...