Jump to content
SAU Community

Recommended Posts

not GTR specialists by any means but Polmar motors in artarmon are very good. Eli is the owner there and a top guy. my friend also works there part time. they have done some work on my GTR and I was happy.

Advan Performance in Silverwater built my car from the ground up and i will never trust my car with anyone else. Everyone has their preferences on workshops so your best to go and chat to a few of them and go with the one you feel most comfortable with.

Advan Perfromance - 9647 1326 (open Saturdays too)

Taken from other post....

George at DB4s - 0298793322.

27 College St

Gladesville

They have been great to me since I got my car. Did a full service with them when I 1st got the car. (approx 1.5g and about 6hrs of work, including timming belth change and all oils and fluids changed)

Tell George Victor sent ya

Powerplays are good too, but whenever I go there they are always busy, seems like Alistair needs a new mechanic or something, as he seems to be doing all the jobs there.

BD4s yea do lots of skylines and other nissans, they are HKS distributors in australia

The mechanic there (Yoshi) is japanese and knows lots about jap cars.. Nathan is good also.

BD4s charge $88/hr for any fixes... And George is a reasonable guy.

I live near UNSW, and i go there for all my mechnical needs, its car but yea i like em

I'd probably also need some advice in regards to this -  

I need to get installed - cams, gears, injectors, fuel pump, sump baffle kit, maybe a metal head gasket, and the clutch.

Where can I get this done, where it wont cost the world ?

Your engine needs to be removed for the work you have mentioned so its not going to be cheap either way.

Do you have turbos to fit also?

Thanks beer baron, i'll have to take a look at them, might drop in on sat and have a chat with Eli and find out prices..

yeah, speak to Eli, tell him I (Richard) sent you. 9966 9930, better ring first if you are going down on a saturday, not sure if he works weekends :)

MSRB26 makes a good point. over the years I've been to quite a few different shops to have various things done. It really comes down to what you think of the place, and how well you think you are being treated. I've been to:

Japp Sport (Sydney Compliance Centre)

Hills Motorsport

Rice Engineering

G&F

Polmar Motors

Unique Autosports (tuning only)

HITMAN (tuning aswell)

Grey Imports

Top of my list would be Rice Engineering (as a good friend of mine owns that business) and they have done great stuff for me over the years. He also prepares a 911GT3 race car for production sports cars. but their workshop is temporarily closed.

Grey Imports have been excellent and I've taken my GTR there and my Soarer there too.

Polmar motors is run by Eli who is a really nice guy and very, very smart. though they are not skyline specialists by any means.

I was very happy with the tuning work done at UAS and HITMAN but never had any work done at UAS or hitman so I can't really comment on that side of their business.

don't really have anything to ad about the others.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...