Jump to content
SAU Community

Recommended Posts

I have used the nulon g70 addtive, and I noticed that it made absolutely no difference at all. It did not make it better when warm or cold.

There are two schools of thought floating around sau

1. nulon g70 contains teflon, which lubricates better, making gear changes smoother, and diffs less noisy.

2. nulon g70 contains teflon, which is TOO slippery and makes the synchros slip.

I've thought long and hard about which one is in fact correct, but my own experiements with it have not yielded any positive or negative resutls. Perhaps someone like sydneykid can comment on it.

A friend of mine put some of this stuff in his S13 and its known to pop out of gear at times (2nd gear inpaticular).

This only happens when theres a few g's on the car, such as during dorifto :)

Is that what you mean by synchors slipping?

Hi , i used some in my GTS4 and it improved things a little- its not a miracle gearbox fixer, a bit smoother gear change when car is cooler. Dont know if it has helped those 7k gear changes, maybe I 've improved my technique a little too. My car does not jump out of gear, I think the silvia gearbox has problems that are not related to additives.

I added some of this to a gearbox that had worn the hard casing of the input shaft to try and cut the noise down a little.

I think it made a small improvment to the noise.

Otherwise i wouldn't say the shifting changed at all.

If you run a mix of gearbox oil and auto tranny fluid you can get a nice shifting box under most circumstances. Alot of people i know run various ratio's such as 60/40 70/30 etc of the two oils with great sucess.

I would probally run a similar setup, but i need to keep the noise minimised. So i need to keep it thick as possible.

AFAIK its some valvoline oil.

Its about 500kms fresh

What  oil do you have in the box?

Should be something like Castrol VMX80 or equivalent.

That oil is designed for boxes that have cold shifting problems. (i.e. Nissan boxes)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...