Jump to content
SAU Community

Recommended Posts

Can anyone give me some names (and phone numbers if possible)

of places that I can get the sunroof seal on my R32 replaced?

Places in western suburbs or city area would be greatly appreciated!

Thanks

Had the same prob. No 1 i found could replace the seal ;) Ended up buying a second hand sunroof, with good seal.

The is a joint that does sunroofs on Princess Hwy just near Dandenong/Noble park not 100% sure of the name i can find out on my way home for you if you like get a number for you to call?

Only thing is Dandenong to for you to go to???

Im fairly sure they did that pimp car for Nova....

I think your referring to The Sunroof Centre. As your heading towards Dandenong

The Sunroof Centre

Address

F4-401 Princess Highway,

Noble Park Vic. 3174

Phone

(03) 95483366

(03) 95462733

Fax

(03) 95585957

E-mail

[email protected]

The guys name is Michael. Usually they can help out. Give them a try.

Ahhh thanks heaps Mavric & MissRB25DET!

I will give them a call/send them an email and see what they say about the sunroof seal, worth a try.

Haha Dandy is the bush, seeing as I'm out near the airport :) But I can make a day trip out of it!

Thanks again for the help, will post The Sunroof Centre's reply up here either way so people know they can give them a call or so people can suggest some other places to try.

Well, I called The Sunroof Centre...

They were very helpful in telling me that I need to find a sunroof seal in better condition from a wreckers or I'm stuck with a leaking sunroof. Something about because its a factory sunroof you cant just pull it out and put a new one in.

So I still need helpppp regarding this, can anyone reccomend some wreckers to try for the seal?

Thanks :O

WazR32GTSt, silicone would be a quick fix, thought I would do that (plus the cover I have for car) for now till I fix it properly...

MissRB25DET I called the guy and he was VERY helpful, however not want I wanted to hear. He said I wont find just the seal, that I will need to replace sunroof. He also said to say thank you to you for all the reccomendations, he is getting business from you mentioning him to us skyline owners :P

Thanks again!

WazR32GTSt, silicone would be a quick fix, thought I would do that (plus the cover I have for car) for now till I fix it properly...

MissRB25DET I called the guy and he was VERY helpful, however not want I wanted to hear. He said I wont find just the seal, that I will need to replace sunroof. He also said to say thank you to you for all the reccomendations, he is getting business from you mentioning him to us skyline owners :)

Thanks again!

some call cable ties a "quick fix" too...

i think they're both a viable long-term option :P

WazR32GTSt, silicone would be a quick fix, thought I would do that (plus the cover I have for car) for now till I fix it properly...

MissRB25DET I called the guy and he was VERY helpful, however not want I wanted to hear. He said I wont find just the seal, that I will need to replace sunroof. He also said to say thank you to you for all the reccomendations, he is getting business from you mentioning him to us skyline owners :P

Thanks again!

Thats really nice to hear :)I have bought a few things from them and never had a problem.

As for the sunroof, what are you going to do now?

i could have a look at it and devize an idea that would make it look OEM....possibly even get an original seal for it

SKYLINE_GURL... Anything this man says he can do.. He Can!!!

Troy is a top bloke hes helped me out numerous times....

Got the car delivered last night and found that the sunroof doesnt open and close, well it moves a cm and opens upwards a bit but doesnt slide open completely.

That wouldnt be just a seal like the guy said would it!?...

I couldn't tell whether the seal needs replacing, not sure where seals are on this sunroof. Is there a seal on outside edge of it that should sit flush with the car roof? That's how I thought it was meant to be but it has a gap all the way around the sunroof...

Can anyone understand what I mean, to explain what should look like?

Now I dunno if needs seal, service or replacinggg

I can hear the motor working and the sunroof moves a bit, just seems to get stuck and not go any further but I can still hear the motor working... might try oil/lube see if it gets it moving, save myself getting new motor/entire sunroof.

Will post a pic up of the sunroof tonight, showing seal, well 'lack' of seal on outside. So much fuss for a sunroof (that i didnt know the car had when looking at purchasing it) But with the melb weather I dont want to wait till it pours and leaks to find out!

Once again thanks for the help, ideas etc.

Loz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...