Jump to content
SAU Community

Recommended Posts

think thats your problem Jackie, rears should only be 5w ..

oh really my rears are 21w. ill give that ago before i go out n get a new flasher unit.

Mine flash that fast that i counted about 30 clicks in 10 secs

oh really my rears are 21w. ill give that ago before i go out n get a new flasher unit.

Mine flash that fast that i counted about 30 clicks in 10 secs

Jackie,

On the way home from work today I dropped into a car yard and checked the left rear bulb in an R33 (yeah, don't ask). It was 21W. By the looks of it I think there are 2 bulbs per side (in the rear) and maybe the other one is a 5W. This is the case with the R32 front indicators, the main is 21W and the minor is 5W.

I disconnected the 5W bulb in my R32 and couldn't detect much if any change in flasher speed. After reconnecting it I then removed the rear 21W bulb and connected a 5W bulb but couldn't detect any real difference in flasher rate. This confirmed my suspicions that you need a significant change in current draw to noticably change the flasher rate. A good example is replacing the bulb with an LED. I did this on my Yamaha R6 and had to make up an additional circuit to correct the flashing rate (it flashed real fast).

This is pointing more towards the flasher unit. It would be good to borrow one from another R33 to check before forking out good money. Autobahn advised that flasher units range in price from $25 to $38.

Cheers,

Ben

i tell you i give up with it lol

its goin into the mechanics next month for a timming belt change so ill just get my mechanic to figure it out. Atleast the flasher unit doesn't cost that much so if it needs replacing i dont mind forking that much out for it.

Ive been looking at this thread over the last few days because I had the quick indicator problem.

My indicators only started going quick ever since the bodykit was done (400r front). Anyhow, I took a look at the blinker bulb today, and it was 5w 12v. I replaced it with 21w 12v globes today, problem solved :)

Thanks for your help guys :)

Jason

Jackie,

I've been dwelling on this topic for a while now as I'm not convinced the faster flashing is due to the flasher unit (I have never had to replace one in the past). I was lost for ideas and its difficult to diagnose a problem without a wiring diagram.

My brother-in-law mentioned the hazard switch in their old 33 had been a problem for them which got me thinking. If you disconnect the hazard switch completely the indicators won't work (from memory) which may indicate that the switch is in series with the indictor switch (ie the power feed goes through the hazard switch before/after the power feed to the indicator switch/stalk).

It could be possible that the hazard switch is adding extra resistance to the circuit (eg due to worn contacts) causing the faster flashing rate. It may be something to mention to the mechanic.

Without fulling understanding the circuit (lack of wiring diagram), solving these problems is usually a trial and error process.

Some food for thought.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...