Jump to content
SAU Community

Recommended Posts

Note: Stuff that i'll take as a trade :

slotted rotors (r33 gtst) in good condition

cheap sub and amp

lilliput touchscreen 7" monitor

More New Stuff added:

Item 1 - bottle of motul gear 300 synthetic gearbox oil. Bought too many. They're $39 at autobarn now. Give me a decent offer and it's yours.

Item 12 –Pivot super temperature controller. This is a full temperature monitoring/controlling unit. It can be used to monitor stock sensors as well as aftermarket sensors. Comes with a temp probe. You can hook it up to the stock water temp sensors monitor your water temperature and use the probe to measure oil temperature. It also has output for doing things at temperatures you set. This is a digital unit so you don’t’ need to have 2 ugly gay gauges on your dash. BRAND NEW. Unwanted present. $300.

Item 13 - 7.2cm x 10m of self-adhesive insulation tape. Good for keeping intercooler pipes cool. Excellent if your pipes are looking rusted and old. Brand new. $40

Item 14 – splitfire gauge cup/gauge ring. 2 5/8”. It can either be used with the anondised blue cup, or you can just use the ring to hold the gauge. Looks really nice. Includes all screws and brackets. Brand new and never opened. Unwanted present. $20.

Item 16 - ½” torque wrench. Brand new. Cheap. $20.

Item 3 - sII rb25 turbo. Minimal shaft play consistent with low km turbos - $450.

Item 5 - rb25 and vg housings http://www.skylinesaustralia.com/forums/in...=164956&hl=

Item 7 - rb20 copmressor elbow - $30

Item 8 - Random turbo install parts - wastegate actuator. turbo dump studs, oil drains, oil drain gaskets, copper washers - just pm me

Item 9 - Assorted Strut braces. Brand New. These are very nice and stiff. Once I installed one onto my car, I could stand on it, and it wouldn't really flex. I have a 300zx brace, rx7 brace and a supra brace. Price: $80 each

Item 10 – Brand New 225/50/r16 tyres. These are Hercules 3000v. This is not a common brand in Australia, but this is their top of the range tyre. Tyres have rim protectors. Come and have a look at them and squeeze/feel the rubber. They are very soft and grip very well. I’m currently using some on my car atm. They are one of the best tyres I have ever used. I’m looking for 125 each. This is really cheap considering even nangkangs (shittest tyres in the world) in this size at Tempe tyres are $125 each. At this price, you’re getting good rubber, you can’t buy anything brand new like this at that price. Seriously, just feel them. :(

Item 11 – NTK AU Falcon O2 sensor. Used for approximately 1000ks for some testing. $100

PS: Guys, keep in mind that some of the above prices are negotiable to some extent. Don't like the price? make me an offer.

Pickup from Sydney, postage at buyer's expense.

I can be contacted on 0403 211 482 - Chris

Item 6 - big workshop trolley jack

Item 2 - cheap 17" semis SOLD

Item - 205 50 r16 RE55 semi slicks SOLD

Item 15 - Pedals. Nice. Brand New. Unwanted present. SOLD

Item 4 - rb25 turbo elbow SOLD

Item 1 - aerospeed cam gear SOLD

Item 1 - GTR Fuel pump. SOLD Thanks ben|1981

Item 1 - GTR Bov. SOLD Thanks Stealth

Item 15 - Nice phone for cheap SOLD Thanks will-32

Item 3 – A pair (2) PIAA five spoke wheels. SOLD. Thanks DNR33

Item 6 – Greddy Oil adapter plate. SOLD. Thanks lineski 33

Item 1 – r34 GTT Turbo. SOLD. Thanks GTShortie

Item 15 - Brake bleeder. SOLD. Thanks Malteser

Item 5 - Stock r33 GTS-T wheels. SOLD Thanks Guilttoy

Item 8 – r32 front Strut Brace. SOLD. Thanks RaceBNR

Item 4 - Ford falcon AU coil pack unit and leads. SOLD. Thanks daemon667.

Item 9 - Catch can. SOLD. Thanks markk

Item 10 - High temp hosing SOLD. Thanks markk

post-10214-1154185103.jpg

post-10214-1154185112.jpg

post-10214-1154185162.jpg

post-10214-1154185493.jpg

post-10214-1154185521.jpg

post-10214-1154185530.jpg

post-10214-1154185557.jpg

post-10214-1154185565.jpg

Edited by MANWHORE
Link to comment
https://www.sau.com.au/forums/topic/80672-garage-cleanout-random-stuff-fs/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

  rob1981 said:
Hey interested in the insulant and torque wrench. where about in sydney r u?

Exactly what I was interested in.

Lemme know if the sale falls through.

Good trader - have dealt with Chris before.

  • 4 months later...
  97r33gtst-typeM said:
  • 7.2cm x 10m of self-adhesive insulation tape. Good for keeping intercooler pipes cool. Excellent if your pipes are looking rusted and old. Brand new and never used. Reason for sale is I bought two rolls to do my car, but I only needed one.$40

  • Anondised blue gauge cup. 1 5/8”. Includes all screws and brackets. Brand new and never opened. Unwanted present. $20.

  • Torque wrench. Brand is unknown. ½” socket type. It is the flex bar type, not the spring type (supposedly more accurate than the spring type). Never used before. Cheap. $20.

  • Brake bleeder. Consists of a clip on hose with one-way valve. You no longer need one person to press the pedal and one person to open the bleed nipple. Just attach this and open the nozzle, and press the pedal yourself. Easy. This has never been used, as it was an unwanted present. Save yourself lots of money bleeding your brakes yourself. $15.

  • Spring Compressors. Standard. Used a couple times. $20

  • 4x stock commodore steel wheels 15". Good for burnout/drift rims. 5stud. I believe it is a different stud pattern to nissan though. perfect if you have a commo- make an offer - beer, whatever.

Everything is located in Sydney on the North Shore

  • 1 month later...
  • 5 months later...
  97r33gtst-typeM said:
Catch Can is gone gone gone!

Parts are moving out the door!

brake bleeder - total price with delivery to adelaide?

cheers.... !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
    • Might as well pop in some cams, head gasket, head studs, and a flex sensor. Full send.
    • Yeah I spent close to a year finding one. I was even tempted to buy a RB25DE N/A head and port it out. That latter option, could still be an option.
×
×
  • Create New...