Jump to content
SAU Community

Recommended Posts

hi all im thinkin about gettin an rb30 bottom end to go with the 25 head, any suggestions for an ecu since my power fc wont be able to run this...my motor will be in for some big hp too so somethin decent but not necessarily extreme in prices

cheers...ben.

Link to comment
https://www.sau.com.au/forums/topic/80738-ecu-choice-for-rb3025/
Share on other sites

I may be mistaken but i don't think there are too many sensors that come from the bottom end. things like crank ange etc are up the top so you should be able to use all standard sensors and therefore the standard power fc, with adjustment, would work fine.

Microtech = bad fuel economy.

I like my 450km's per 50litres with the rb30det. :)

Light load hasn't been tuned yet, its with a stock turbo boosting from 1000rpm, once the bigger turbo is on it should return better fuel economy the same if not better than the rb20det was returning. 470km's per 50litres.

If it's a streeter, definately a PowerFC or anything with closed loop. If you want it to also drive as smooth as the factory ECU, it must have idle control, cold start function, various fuel/ ignition compensations, air/water temp correction, decel fuel cut, etc.

I went for a Haltech E11v2 as it had more versatility with respect to aux. inputs/outputs, appeared more user freindly and my tuner was more comfortable with it rather than a powerFC.

If it's a streeter, definately a PowerFC or anything with closed loop. If you want it to also drive as smooth as the factory ECU, it must have idle control, cold start function, various fuel/ ignition compensations, air/water temp correction, decel fuel cut, etc.

I went for a Haltech E11v2 as it had more versatility with respect to aux. inputs/outputs, appeared more user freindly and my tuner was more comfortable with it rather than a powerFC.

thats the thing, go with what your tuner is comfortable with cause there's no point having a computer that can't be tuned by your tuner!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
×
×
  • Create New...