Jump to content
SAU Community

Recommended Posts

Hey guys. I am currently looking at upgrading my turbo to a HKS GT-RS or GT2530 KAI and I would like some advice on the upgrade. I own a manual R33 Skyline sedan and basically I am after an internal gated turbo as I want the car to be perfectly streetable and insurable but I want it to be fast at the same time. Other things I will upgrade with the turbo are AFM, ECU (Power FC), clutch, injectors, fuel pump etc. The car already has a cat-back exhaust and HKS FMIC so hopefully I don't need to replace those things. I would like to know which turbo would best be suited to my application and the advantages and disadvantages of each. Any other information is greatly appreciated and please forgive my ignorance on this subject :confused:

Link to comment
https://www.sau.com.au/forums/topic/81088-hks-gt-rs-turbo-on-rb25det/
Share on other sites

should be plently of info in the rb25 dyno upgrade thread, should be stickied at the top or in the forced induction reference thread. change the stock dump as it will be a restriction. the gt-rs will flow more and should get you near 260/270rwkw based on some of the graphs from the rb25 dyno upgrade thread. the 2530 kai havent seen any graphs or runs from anyone running these yet, probably silighty more than 2530 but less than 2535 at a guess?

check out the rb25 dyno upgrade thread. the mods youve listed should do you fine. maybe consider a set of cams, should do wonders when you have a bigger a/r turbo

Check the HKS website for details

HKS achieved 290kw and 465Nm at the engine with GT-RS on a RB25 stagea

,268kw and 450Nm with GT2530-KAI in the same set up.

Both made peak power at about 6500 rpm and peak torque at 5000 rpm.

As the GT-RS kit only costs two or three hundred dollars more, this may be the best way too go.

More power with a slight loss of response but will save you from wondering "what if?" which could happen if you went with the smaller turbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...