Jump to content
SAU Community

B.o.v

Diablo

By Diablo,
in Engines & Forced Induction

 Share

Recommended Posts

GunMetalR33 Mentor

GunMetalR33

Posted
Posted

Sorry dont mean to be rude:

NA cars run with neg pressure in the plenum. This is what pulls a BOV open, therefore the BOV on a na car would be always open... This would be like punching a hole in your intake piping somewhere which would probably mess with your Air/fuel ratio's.

No performance gains to be made with this mod.

I am not 100% on the: "the BOV on a na car would be always open" call but i am pretty sure ;)

Link to comment
https://www.sau.com.au/forums/topic/81263-bov/#findComment-1476307
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted
Sorry dont mean to be rude:  

NA cars run with  neg pressure in the plenum. This is what pulls a BOV open, therefore the BOV on a na car would be always open... This would be like punching a hole in your intake piping somewhere which would probably mess with your Air/fuel ratio's.

No performance gains to be made with this mod.

I am not 100% on the: "the BOV on a na car would be always open" call but i am pretty sure ;)

not quite right. the difference in pressure between the two side of the diaphragm or piston is what pushes the valve open. on the one side you have the boost in the intercooler pipe, on the other side you have the pressure from the manifold (post throttle) when you close the throttle pressure in the manifold drops but the pressure in the pipework is still high, the difference in pressure is great enough that boos pressure in the pipes is able to overcome the pressure of the spring.

Link to comment
https://www.sau.com.au/forums/topic/81263-bov/#findComment-1476456
Share on other sites
GunMetalR33 Mentor

GunMetalR33

Posted
Posted

cheers, that was kinda what I figured...

not quite right. the difference in pressure between the two side of the diaphragm or piston is what pushes the valve open. on the one side you have the boost in the intercooler pipe, on the other side you have the pressure from the manifold (post throttle) when you close the throttle pressure in the manifold drops but the pressure in the pipework is still high, the difference in pressure is great enough that boos pressure in the pipes is able to overcome the pressure of the spring.
Link to comment
https://www.sau.com.au/forums/topic/81263-bov/#findComment-1476503
Share on other sites
geno8r Grand Master

geno8r

Posted
Posted

I seen the thread name "B.o.v" in the NA!!! Section of the site & just had to look & hope somebody wasn’t asking how to fit one or asking if it provides any performance gains... and...

Would fitting a blow-off valve to a non-turbo skyline provide an benefits to the performance at all?

Plus would the car build up enough pressure to produce any decent sound?

;)!! Hahahaha

Think your gona need a turbo m8 if you want to run a BOV.

Link to comment
https://www.sau.com.au/forums/topic/81263-bov/#findComment-1476556
Share on other sites
satanic Grand Master

satanic

Posted
Posted

Pardon the ignorance here... I have a turbo car which has the factory BOV on it atm...

Can someone please explain the imporatance of an aftermarket BOV? What are the gains to be achieved? And is it really necessary (being illegal and all)?

Thank you

Stan

Link to comment
https://www.sau.com.au/forums/topic/81263-bov/#findComment-1476632
Share on other sites
geno8r Grand Master

geno8r

Posted
Posted
Pardon the ignorance here...  I have a turbo car which has the factory BOV on it atm...

Can someone please explain the imporatance of an aftermarket BOV?  What are the gains to be achieved? And is it really necessary (being illegal and all)?

Thank you

Stan

Aftermarket BOVs actually increase boost & raise torque... :D

hahah Nar aftermarket BOV are usually only bought because of the noise they make but they can also serve the purpose of venting a greater amount of air to keep ur turbo spinning better if you’re running higher boost. But there's always rally style anti lag systems which work better than that in conjunction with a BOV hehehe. BANG BANG POP

Link to comment
https://www.sau.com.au/forums/topic/81263-bov/#findComment-1476691
Share on other sites
satanic Grand Master

satanic

Posted
Posted
For your car & many of our cars, you'd really only get one for the noise / visual appearance in engine bay... Otherwise stocky is fine.

Thanks guys

Hey geno8r, when we going for that cruise? Or even just a general meet up?

Link to comment
https://www.sau.com.au/forums/topic/81263-bov/#findComment-1476773
Share on other sites
geno8r Grand Master

geno8r

Posted
Posted
Thanks guys

Hey geno8r, when we going for that cruise?  Or even just a general meet up?

Ahh man I forgot about that... I got busy again... had some extra work coming in so been occupied... If someone organises sometime I'll be there but yeah just haven’t had time to organise anything really... If you reply to this probably best not to ‘off topic’ anymore in this thread & reply back in the other one...

Link to comment
https://www.sau.com.au/forums/topic/81263-bov/#findComment-1476781
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...