Jump to content
SAU Community

Alarm recommendations


Pawley
 Share

Recommended Posts

Fella's after an opinion on alarms that are suitable for adelaide vehicles. I realise some of the pager or GPS systems arent set up to work here yet (or never), and would like to know if there are any favourites amongst you all.

Things like costings and where to get installed would also help.

Link to comment
Share on other sites

Check out the standards.

Not many come up to scratch.

Here's a link to some requirements which is pretty high from Young and Cool Insurance.

http://www.youngandcool.com/immobilisers.html

Here is a link to the Immobiliser/Alarm that they recommend.

http://www.brant.com.au/html/carsec.htm

I looked in to it and they are a very good alarm. Black wire etc etc

The alarm version is around $600.

Link to comment
Share on other sites

for me i just got an alarm from autobarn cause a few of my friends got the same one ... i say just go to a reputable shop and ask to see what they have .. .check out the specs to see if it meets your needs ... can vary in price alot ... but i think its also important to park your car in secure places and not to rely solely on the alarm ...

Link to comment
Share on other sites

anybody have good or bad things to say about the Boomerang system. Seems like an expensive option, but good to know that the alarm will page you if it goes off (and you are in range) rather than relying on other peoples reaction to a blarring car alarm.

Link to comment
Share on other sites

Boomerang is ok if you in range, for that price you might as well get a tracking system for a bit more at least you will get a call on your mobile and if its gone have some tracking ability. Otherwise just get a good 3 point imboliser that is installed properly

Link to comment
Share on other sites

i cannt find any info of tracking systems operating in adelaide

the subscription to these would be a pain in the a$$, but nice piece of mind

have heard stories of tracking boxes being found on the road where a stolen car was once parked..... i suppose not hidden well enough

Link to comment
Share on other sites

U would need a GPS based tracking system in that case, Brant does this but would cost just under 2k. Maybe you can find another similar but i doubt it would be cheap. If the tracking system was found out of the car then im thinking the guy had to much time with the car, the tracking system main purpose is to alert someone that it is being stolen/broken into, so you can take action agaist this.

Link to comment
Share on other sites

I put a boomerang in with all the options, i believe it is the best investment i have made in the car. I love all the options it gives you, and i wouldn't put anything else in my car's now.

Link to comment
Share on other sites

I've got a clifford Alarm Arrow 2 and that isn't certified as it isn't Australian Certified.

So If the car got stolen and I was insured with them they wouldn't cover it.

Also you need to get a place to fill out the certificate they gave you.

I ended up going with Famous Car insurance in WA as they were 1093 with the mods listed FMIC didn't increase the $$ as it doesn't increase performance. :)

And they do fortnightly direct debits. That will come in handy in 2 months when I go to uni. No money.. :) argggg

Link to comment
Share on other sites

Originally posted by -Joel-

I ended up going with Famous Car insurance in WA as they were 1093 with the mods listed FMIC didn't increase the $$ as it doesn't increase performance. :)

And they do fortnightly direct debits. That will come in handy in 2 months when I go to uni. No money.. :)  argggg

they sound perfect!!!

if only i didnt lose my licence ..... bastard

just car are too f@cking expensive:mad:

from what i have "heard" brant are pretty damn good , and good value. most decent insurance companies pretty much only reccomend theyre product

cheers

shannon

Link to comment
Share on other sites

  • 2 weeks later...

I've got a boomerang system in the R34.Haven't bothered to find out about all the options yet.It does seem to work well, but I never leave the car anywhere unsecure so it hasn't been set off before(touch wood).The battery does seem to go flat very quickly.

The EVO doen't have an alarm or a stereo.Will have to look into that(when I get it that is)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Opened up the cluster to inspect the gauge itself for signs of damage and it looks good. Got curious since that needle doesn't go back to a "neutral" position by itself (it stays in the same position when ignition is off. so I manually moved it to 1/2. Connected it back, turned on the ignition and the needle started moving up! Not sure what's up with that but before that the needle was way down below empty like fully south west. There's always a chance that the needle moved slightly the first time I tried and I didn't notice because of how slowly it moves and how far it was from the markings. I don't know if the current needle position is accurate so I'll fill it up and see where that brings it. I guess I'll try to adjust it manually if it doesn't get to F. Looks like the needle position is relative and not absolute? Thanks all for your help and patience!
    • You're confusing two different responders and more than one issue. The stock Neo ECU boost sensor is used by the ECU for protection purposes. It is essentially only an overboost sensor. It is not used for determining engine load for fuelling or ignition purposes. That task falls solely to the AFM. Any aftermarket ECU that either has an onboard MAP sensor or a plug in one, will use the MAP sensor as the primary load sensor. Or I should perhaps say "can", rather than "will", because some of them have the option of using other primary load sensors. That MAP sensor is not for the same function as the stock Neo boost sensor. The reason I recommended against a plug and play ECU is that they are intended to run a particular engine and usually in the car that the particular engine came in. So, if you have a transplanted engine in a different car, with some parts of the original missing (such as the boost sensor, for example) and therefore likely non-standardness of the loom and its insertion into the car's loom, then it is very likely that you will run into the same problems with needing to fix up wiring to make it work that you would with the stock ECU. And, if doing so for the stock ECU is enough of an obstacle that you start considering a standalone plugin as a solution, it should become clear that the plugin is quite possibly not the solution you'd hope it to be. It would just lead to more of the same type of problem solving work to get it going. In the above paragraph and in my earlier post, the lack of the boost sensor is not critical. It was just used as an example of something that we knew you did not have right, such that the stock ECU would not work. I took that as an indicator of a reasonable probability that there were other related problems hiding there.
    • I can think of two places in my city of <1.5million population that specialise in automotive instrument repairs.Unless you're out in the wilds of Quebec, you have 3 major Canadian and 3 major US cities within the same distance as the single nearest city to mine. Surely there is somewhere you could send it.
    • I never cared for twins but whenever these conversations came up, I always presumed the higher number represented a larger turbo. Learn something new everyday. 
    • Interesting, I've never seen a failure like that before but with the age of these cars and the general questionable-ness of all kinds of parts these days you can't rule anything out I suppose. Boost leak testing the boost control system would've revealed this though.
×
×
  • Create New...