Jump to content
SAU Community

Recommended Posts

D1 drift and racing intercooler kits - one of the highest quality kits on the market. Now can be purchased without the a group buy at a extremely low price!!!.

For the next 10 kits only all piping kits are delivered for $350 and full kits are $530.. number of kits at this price left = 10

SPECS

Made from polished aluminium with no mandrel bend marks on any of the pipings. Piping is 2.5" and is very similar to the hybrid kits. The flange on the end of the piping is bigger than the hybrid kit for added support.

Silicon joiners are triple layer with chaffing on the third layer.

Clamps are stainless steel

All kits fit perfectly on the R33/R32 and the s13/180sx. When these were manufactured they were also tested on sample cars and the samples have also been tested in Australia. Many people have bought these kits without a single complaint

Will fit most hybrid coolers.

BONUS: All kits come with the nipple to hook up the turbo boost line too. Save a few $$$

Warranty

All kits are backed by an australian warranty 1 year.

Price

$370 delivered for the piping and $550 with the cooler (600 x 300 x 76 mm)

Arrival

Here now ready to go.[/color]

post-11183-1127990468.jpg

post-11183-1128725527.jpg

post-11183-1128725554.jpg

Link to comment
https://www.sau.com.au/forums/topic/81321-drift1-racing-intercooler-kits/
Share on other sites

  • Replies 104
  • Created
  • Last Reply

Top Posters In This Topic

My aussie supplier wants them out the door!!!! So I have the go ahead to sell each kit at $390 in a group buy or $420 without GB... Pm me or reply for more details. Be quick!!! at this price they wont last...

Ive already done a fair bit of mods to the back of the plastic part of the bumper and the front section of the chassis rails to mount the intercooler in there. As far as I can see I just need to cut and shut the two lower pipes to fit the extended end tanks, possibly using a silicone joiner, if not re-welding. This seems the best option short of making a custom set of pipes, which looks like costing around $300-350 in stainless mandrel bends and parts, let alone labour and hassle.

probably will be the cheaper and neater option to modify the d1 kit ....

I have a few kits at home now I will be taking a few picture of them and maybe tomorrow of next weekend putting it on my car and taking it down the drags to give it a test.. :cheers:

How do the piping kits fit in with the factory piping? Does it bend round and come back to the factory intercooler piping? Or does it curve round and come back over the top of the radiator and fans?

it curve round and come back over the top of the radiator and fans? yes that the one..

Just off topic: My mate has a s13 and just put one of my cooler kits on it. My car would be a mid to high 13 if I had decent tyres otherwise it is a 14.051. Anyway he flogged me (2 cars ahead at 140k) and this is the only mod he has done. Oh and apart from the fact that he forgot to hook up the wastegate :rolleyes: 15 PSI he was running. No ping either... Maybe because the cooler is working well - hot on the turbo side and freezing cold on the other...

hey raf, u have an r33 ey don't you?? during the install do you need to move the horn at all?? My horn is mounted next to the fan protruding in front, but the hybrid install ionstructions don't mention it. Any hints for install would be much appreciated.

Cheers

I just installed mine on sunday :) ... Yeah I had to move the horn. I placed it on the bonnet hinge bolts.. The wired will reach it you unclip one of the tyes...

IT took me 7 hrs to install the kit but that because I took my time painted painting the cut surfaces so it wont rust and trying to do a nice job... I forgot to get my camer and take pictures :) but I will take a few picture after my camera is charged an post them up...

I got an extra 1 psi and really noted the difference after I reset the ECU... if I take off like a grand ma, first gear starts spinning the wheels after 4000 rpm and spins most of second gear :) little chirp in 3rd.. Once I start playing with the boost then I should see some action...




  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...