Jump to content
SAU Community

rb25 and rb20 gearboxes for sale

ISC-Performance
 Share

Recommended Posts

  • 1 month later...
  • 3 weeks later...
paul74 Apprentice

paul74

Posted
Posted

does a rb20det gearbox speedo cable reach a rb25det series 2 gear box if not how do u get around it? and the series 2 rb25det gearbox i'm sure was electronic. I'm looking at putting a rb25det gear box in my r32 as the rb20det boxes are piss weak.

  • 2 weeks later...
Russman Grand Master

Russman

Posted
Posted
on the shaged box you have will you seperate the seedo worm drive, if so how much?

All of you guys who have killed RB20 boxes - Do you still have them and would you be willing to sell me the neutral switch?

I've got a whole box in melbourne. 2nd is stuffed. I'd sell if for 50 bucks and you can pick the bits you want. speedo worm drive? is that the gear and conector for the speedo? Think I got it?

browny Proficient

browny

Posted
Posted

Mate I'm up in Newcastle so I obviously can't call round in person. The neutral switch is a cigarette lighter sized bit that simply screws out of the side of the box. Would you be able to post it up to me. Obviosly I'll pay post.

Russman Grand Master

Russman

Posted
Posted
Mate I'm up in Newcastle so I obviously can't call round in person. The neutral switch is a cigarette lighter sized bit that simply screws out of the side of the box. Would you be able to post it up to me. Obviosly I'll pay post.

Is it the thing that contains the speedo gear?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...