Jump to content
SAU Community

Recommended Posts

Dude!!!

Save your money untill off you "P's" and then you can go wild!

Maybe just rim's and a tidy up for now.

The money you spend now on it could be better used dump it in a term deposit so when your off your P's you have Money + intrest earned to spend on car or buy new car!!!

Save now and spend when you will beable to appreciate it more i.e. less limits to what you can do.

Naman

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

In the end, horses for courses. One person's "omg hektik" is another person's "what a fnarken retard". If you want to do it and you think it looks good, then you're getting your money's worth. Its not like anyone else is paying for it.

Just be prepared for reactions that range from your usual pimply-faced dropkick with about as much clue about driving as they have about nuclear physics giving you props because your petrol-guzzling fashion accessory is "the bomb", as people who prefer their sports cars to be....you know....sporty and go fast, using you as an example of how shallow the car enthusiast gene pool has gotten these days.

The way I see it (as if it wasn't clear enough already), people who rice up their cars and live the "auto salon" culture are ****ing stupid. They take a perfectly good sports car, one that might be lauded as near the top of its class, and then they systematically disable everything that made it so good.

Ricers are arriviste that want to look like the knowledgeable people who bought and appreciate the cars for what they're good at, building their reputation as street or track weapons, and then just ruin cred of the cars by making them loud and gaudy, and go like shit, and make the true enthusiasts look bad by cruising around acting like complete tools.

But, don't let the fact that I'll think you're not even useful as raw material for soylent green deter you from tarting up your car like a $2 hooker. I think lots of people who aren't in to driving, maintaining and modifying sports cars properly are losers too.

The way I see it (as if it wasn't clear enough already), people who rice up their cars and live the "auto salon" culture are ****ing stupid.

you seriously have a nieve outlook on things, justifying every person that acts like an idiot on the road and calling them a "ricer" that lives the "auto salon" culture is stupid, have you actually been to an autosalon event or read the magazine??? not every car they feature is "riced" they also feature alot of japanese tuned cars, cars that are from notable tuning houses and are actual time attack or circuit cars or drift cars, in fact in the last 3 or 4 issues they've featured a number of these sorts of cars, some even built here by chasers in melb. and such, just coz u see some random idiot in a riced up car acting like a tool, doesnt mean every single person that drives a "riced" up import is like that.....

and saying everyone who participates in the "auto salon" culture is like them is also a waste of you typing coz ur wrong, in fact doesnt SAU have members that compete there cars in autosalon??? are you calling them "idiots" that dont know how to "modify there cars properly" as well??? seriously think before you start ranting.

seriously think before you start ranting.

I do. Hence why my first sentence was "horses for courses". I gave an unbiased view first, and then I gave mine (which, being my personal opinion, can't be anything but biased). Bear in mind that he was asking for personal opinions, so (once again) as I said, expect both sides of the spectrum.

Naive. That's rich...

I don't have time for show ponies. I don't have time for people who treat their cars like works of art, rather than tools for carving corners. I've been to an Auto Salon, which was more than enough, and when other people go and bring back pics I still check them out. I look at cars that, at the low end of the scale, are unsuited for commuting on Sydney's pockmarked roads and will probably break stuff when taken for a spirited country drive. On the high end, some of the Salon cars (like that gold plated S15, or the single seat Osman's WRX) can't even reasonably be driven anymore.

I've read a couple of ASM's. I read one of the recent ones, where they took a bunch of hi po cars on the dyno, strip, track, etc. When these guys hit the track, the attrition rate was horrible.

A full half of their field had mechanical failure. But, just because their sports cars break down when they're used for motorsports doesn't necessarily mean they're not "modified properly", right? :roll:

Of the half that did manage to finish the timed session, only a couple of them were lapping the track at times I wouldn't be embarrased to make public had I spent that much on "performance".

The cars were great on the dyno though, and most did a reasonable job on the strip. Not places that I, personally, think are great venues to demonstrate driving ability.

But, for every feature car that has the go to match the woah (for as little time as the thing doesn't blow hoses or crack intake piping), how many bimbo boxes with OTT fibreglass bodykits, loud exhausts and slammed on big rims (which are the extent of their "performance" mods), and retrimmed interior with big stereos do they show off?

It might because I'm a driving enthusiast, rather than a car enthusiast. I care about how a vehicle performs as a package over a long period of time, not how good a job it does when sitting stationary inside a big convention centre or when its driven at full noise for under a quarter of a minute. But as for naive, I've been in to cars for a while and I've hung around with everyone from ricers to touge style drivers to track warriors to large-capacity street machiners. I've seen a wider range of subcultures, and I decided what I like based on that.

But that's just me, and I'm in a minority. A lot of people these days are impressed with bling, whereas I'm the kind of guy that likes sleepers and "drift cops". Cars that go quick and are either stock looking, or so delapidated outside that the owner clearly has their priority on getting from A to B rather than leaning on their fenders while parked at A.

As for the SAU members that compete in Auto Salon, here's a hint from the real world Mr "you're naive"; not everyone happens to like what other people are into. I won't go out of my way giving them a hard time about it but, if asked, I'll shoot from the hip and tell them what I think. If this thread was about "check out my mad bodykit / paintjob / whatever" I would have kept my opinion to myself. But, since its asking what I think about rice, I'll state my piece.

And are you saying that, just because they're on SAU that they inherently know how to modify their cars legally and with mechanical skill? Does signing up for an account or paying some money for a club membership automagically imbue you with engineering skills? Sorry, who were you calling naive again?

That said, it doesn't mean I don't like the people doing it as well. They might be perfectly nice people, and great to hang out with. But then I'm not naive enough to assume that this one facet about them is everything about them.

Its bad.. :cheers:

I'd much prefer to make the car go harder than wasting money on body kits, bov's, neon lights etc.. Once its going hard then sure. Do the body kit but please no neon lights, they belong on Hyundai's. :(

I see a riced up car with big go fast wings, 6" exhaust tips big loud bov, watch it take off with its stock smooth clutch and think hrmm ok.. lol

heh scathing ...

that reminds me of seeing a wrx with 19" rims going around the track... -.-

A car enthusiast must have at least more then one car... a race car, and a pimped car :cheers:

Then agian, in japan atm they are all about combining the street car with the race car style, becuz its more of a challenge then if it was just circuit/drag built. (eg gutted interior etc) Also, becuz its more practical that way for normal people to have a fast car they can drive on the street, n they make more money .. etc etc

Sure if u want a blinged out car, you can get the attention. But attention isnt always a good thing...cops, critics

Rice, (in my opionion) is a waste of $. The closest I would get to rice would be buying a car with a factory bodykit and maybe putting some nice gunmetal Volk TE37 or similar jap wheel.

Buy the GTS look after it properly. Save the $ spent on rice, gain interest then,

Buy a GTST look after it properly. Save the $ spent on rice, gain interest then,

Buy a GTR.

A GTR will put a much bigger and long lasting grin on your face than a riced GTS will.

Disclaimer: this is all just IMHO and is based on the enjoyment of using a car rather than looking at one.

IE do u want to be a :cheers: or a :Pimp2:

the problem with the majority of ricers (about 99.99% of them) is that they actually belive the changing the paint and slaping on a loud exuast will make their car go faster. as long as you know that slapping on a bodykit will slow your car down etc you'll be fine.

i think asking if you should rice up your car is like asking if you should get your nose/boobs done. keep it natural.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...