Jump to content
SAU Community

Recommended Posts

why wouldn't you weld a diff in a r32?   best mod i ever did!!! (not to mention cheapest)

1. they brake when doin ringies, then its time for a new diff.

2. its just unsafe drivin in the hills when its wet wif a locker,or any where at a speed higher than about 60.

3.there not legal.

4.why not just get an lsd,they dont brake,there safer and there legal

my 2 cents

Link to comment
https://www.sau.com.au/forums/topic/82404-locker/#findComment-1493562
Share on other sites

1. they brake when doin ringies, then its time for a new diff.

2. its just unsafe drivin in the hills when its wet wif a locker,or any where at a speed higher than about 60.

3.there not legal.

4.why not just get an lsd,they dont brake,there safer and there legal

my 2 cents

Compaired to a $1500 2 way? I dont mean to sound rude, but a locked diff is a locked diff, it doesnt matter how fancy the diff is, or whats in it. If its locked its that simple.

Link to comment
https://www.sau.com.au/forums/topic/82404-locker/#findComment-1493609
Share on other sites

1. they brake when doin ringies, then its time for a new diff.

2. its just unsafe drivin in the hills when its wet wif a locker,or any where at a speed higher than about 60.

3.there not legal.

4.why not just get an lsd,they dont brake,there safer and there legal

my 2 cents

1. LSD's need an overhaul from time to time (re-shim) adds more cost. A welded diff will need to be replaced. I've been drifting with my diff 3 nights a week for about 4-5 months now and it's holding up to the challenge no probs!

2. 2-way is just as safe/unsafe as it does the same thing!

3. 2-ways are also not legal!

4. 2-ways cost more, and require servicing/reshim's

Have you driven with a locked diff before? have you driven with a good 2-way?

a 2 way in good condition is just the same as welded, (however it will unlock with the clutch in).

imo, they are perfectly safe, people have this misconception that as soon as you go around a corner in the wet, you'll loose control.

This is not true, you just have to be a bit wary of how the car will react. A locked diff is far more predictable than a viscous lsd or an open wheeler, and if i was in the situation where i lost control in the wet, i'd rather have the confidence you get with a locker that i can put the power down all the time!

Link to comment
https://www.sau.com.au/forums/topic/82404-locker/#findComment-1493724
Share on other sites

If the diff is locked (welded), then it's locked. It will be a piglet to park the car. It will skip the inside tyre when doing U-turns. It will be a bigger piglet if you have to push the car around a corner.

A LSD is only "locked" when it needs to be, and that is usually only when the centre senses a loss of traction in 1 wheel and transfers drive to the opposite wheel.

Link to comment
https://www.sau.com.au/forums/topic/82404-locker/#findComment-1493822
Share on other sites

say for someone who is looking at doing track work (i.e. not drifting, but actually racing against cars/clocks etc) what would be the best sort of diff? 1 way LSD? or 1.5 way?

The way i see it, is if you're doing circuit work, you don't want the diff to be locked when you back off the throttle, otherwise its going to lift-off oversteer easier, or push understeer if you're already in the corner and it can't break traction, therefore, i would think that the 1 way would be best (for circuit anyway)?

Link to comment
https://www.sau.com.au/forums/topic/82404-locker/#findComment-1493934
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If we're going after market gauges, I'm a big fan of Australian made... Get some RedArc!
    • Unless you're fortunate enough to buy a newer car, getting an older style plate to match your name/car is difficult because they've already been purchased.  Unlike other countries, personalised plates are locked to the country and not region, so there can't be multiple versions of the same plate but with a different area code.  Hope that helps
    • People use the numbers to make it look like letters to spell words/names, which is where the illegal spacing comes in. For example this GR Yaris  
    • Today's rock removal from my stock pile out the back into a 4m³ skip bin, I still have a bit to go, hopefully there's enough room in the skip bin, it will be close My daughter and her boy was coming on Sunday to help, but, I got possessed by demons and started work as soon as the bin arrived at 1230 today Lots and lots of barrow loads were achieved  Currently I'm sitting on the lounge drinking beer thinking of how I should have waited till Sunday for some help, tomorrow will be a day off, in saying this, my day off will involve prep and paint of my alloy coolant and PS tanks with wrinkle paint (Jackie is in Sydney till Sunday so the home oven will get a run curing the paint....LOL)
    • That's why I said it is a meaningless term. Because there is more than one meaning that people can apply to it. When we said "highflow", that is exactly what we mean, and exactly what is done. In a highflow, they take your housing and machine them out to take bigger wheels, have a better internal profile, etc etc, and fit a new core with the different/better/bigger wheels.
×
×
  • Create New...