Jump to content
SAU Community

Recommended Posts

Hi guys, just been trying to find the best computer parts(new) store in Canberra. I am moving to canberra in sept but want to do some things to my computer and the only one i found so far is very expensive. eg. Epson RX510 3 in 1 photo printer is $485 at one store and the local Umart.com.au in brisi has it for $320.

any tips

Stephen

p.s. anyone interested in a GTS4 in the ACT, check out the forsale section.

Link to comment
https://www.sau.com.au/forums/topic/82453-computer-shops-in-canberra/
Share on other sites

There aren't any in Canberra that are reasonably priced compared to many of the bigger interstate stores. You are better off buying online and getting it sent to you or purchasing at the regular computer fairs, although you have to be careful there.

I went to a place in the Churches Centre in Belconnen and when they told me the price I just told them the price I was going to pay and they accepted.  It pays to know your prices.

Very true most will say a set price on the website however generally if you can prove a competitor even interstate they will match it or at least give you a little bit of room to move on the price

  • 2 weeks later...

Harris Technology in Fyshwick is very good. From my experience, they stock the gear that other mainstream stores (like Harvey Norman etc) don't yet have. Their website is www.ht.com.au and prices are better than most.

I work in the IT industry and agree that it pays to know your price and shop around. Most of the computer stores in canberra want your business and are happy to negotiate. Unlike alot of other IT people, I've tended to stay away from the computer markets. It's luck as to whether or not you may end up with some dodgy stuff and it's not worth it for the sake of a few bucks. And as mentioned, it's easy to visit a mainstream retailer and negotiate a price. The obvious bonus there is that you how to find the store again and can get a replacement or refund if the product fails.

Harris Tech are pretty good (I use them at work) but I personally think they're only worth it if you can get a discount someho., I've seen cheaper places around.

Their customer service is fairly reasonable for a shop (I guess the very large corporate sales they do has something to do with that)

I have been in the ACT for a few months now and I must admit I have not found a computer store I’m happy with. Computer Fairs are very popular here and probably the reason its hard to find a real computer store. Most Sat and Sun you will find a fair on somewhere (check local media).

In Melbs or WA its not uncommon to find stores where you purchase through the front counter, then collect your goods from some massive where house out the back. Something I am yet to find in Canberra (help wanted).

HT in Fyshwick carries a range of stuff in stock. It’s pretty basic and pricy. Harvey Norman and Domain have big computer / technology sections. Stay away from HiMicro in Fyshwick tho. They have all but one blank CD in stock (let alone pc parts) and will charge you for the privilege of listening to them dribble rubbish.

My number 1 for PC stuff nowadays is EBay. If you do your research (like any good purchase) you can make some real savings. To be honest I very rarely use anything else. I try to choose Sydney based vendors for expensive (warranty) type stuff and international for everything else. I could go on for hours about the savings. Time and time again I have browsed the retail stores, playing them off against each other for a lower price. Then I check eBay and find the same item $50 cheaper - delivered to your door.

  • 2 weeks later...

ive worked for at least half the computer stores in canberra take my advice do not by anything proprietary e.g. hp, packard bell, or anything you would normaly by from a store like harvey norman. get somthing custome. for price i do recomend the computer fair but you have to know what your doing, research your items and the retail price then compair, and try to find stalls that are run by peolple who have there own computer buisness in canberra, many stalls at the fair are mainly asians who run buissneses in sydney who I whouldnt trust them as far as i could throw them. also i pays to go to the fair for a few weeks befor you buy anything that way you can get to know who are the regulers, so you know who will be there if you have to take something back e.g. the fault part they sold you

hop this is of some help

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...