Jump to content
SAU Community

Recommended Posts

hello,

yes more problems with the R32 GTR!!!

last night driving around, stopped at a set of lights no harder than normal 50-0 with light braking to bring car to a stand still.

anyway, i was stopped next to a concrete wall to my left ie about 1.5m from side of car.

anyway, i pressed down on the brake pedal from where i had it to hold car still, basically to the floor and there was this loud creaking sound coming from the front left brake as i pressed the pedal down and released it.

the concrete wall allowed me to hear it from the drivers seat with windows down very very easily.

i'm not sure if it was coming from the other brakes and haven't had a chance to check it out, but it sounded like the caliper was pushing so hard on the disc rotor that it was bending the front and rear of it together, assuming the rotors are ventilated? i cant remember will have to check. they are the stock cross drilled ones though.

any ideas anyone?

i'm guessing new pads, rotors and caliper rebuild is on the cards, right?

and probably stainless lines, new fluid and whats this i keep hearing about stainless master lines or whatever?

well since i'm here, any suggestions for brake workshops in syd??

cheers guys

Dan

Link to comment
https://www.sau.com.au/forums/topic/82498-creaky-brakes/
Share on other sites

I had this exact same noise a little while ago in my R32 GTST... I did a full brake bleed with new fluid and it got rid of it for a while. But about a month later it came back again... :rolleyes:

About 3 weeks ago I overhauled all callipers... Got new pads and Motul Dot 5.1 fluid, and havent heard it since. Hoping it wont come back :unsure:

Cheers

Link to comment
https://www.sau.com.au/forums/topic/82498-creaky-brakes/#findComment-1499041
Share on other sites

Bleed your brakes properly and use decent fluid. The creaking usually means that there is air in the system. Its not hard, but if you are unsure of how to bleed your brakes, take it to a professional brake place like ABS or something. Its not much labour, so it shouldn't take long.

Lior.

Link to comment
https://www.sau.com.au/forums/topic/82498-creaky-brakes/#findComment-1504861
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...