Jump to content
SAU Community

Recommended Posts

Hey All...

I've recently swapped over the el-crappo stock head unit (wouldn't play cd's anymore) with a new, single DIN one. Nissan has quoted approx $60+ for a DIN pocket for the remaining empty space which i don't believe is value for money considering that the pocket is handy but still relatively simple...

Out of curiosity, what has everyone done with the extra DIN Space? any brilliant ideas??

The only think of is to put gauges there? Autobarn advises that they may be able to order a cheaper universal DIN pocket made for a group of different make/models, but they don't appear to fit just right.

Does anyone know where to get cheaper, correctly sized din pockets???

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/
Share on other sites

Hi Blur

I got a generic DIN pocket for $15 from JB Hifi in Adelaide ... not sure if they are interstate. Was pretty easy to adapt and get it to fit in there.

I've also heard that pulsar DIN pockets fit in, you might be able to find one at a wrecker.

For gauges, you can buy 3 slot DIN gauge holders to fit 3 2" Gauges off Ebay, but they're pretty rubbish and a pain in the butt to install. (plus you need 3 2" gauges to fill it!)

If you have a cool $1000 to spare, Autobarn sells a single DIN DEFI gauge cluster.

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1498140
Share on other sites

you could try and find urself the din gauge cluster from a GTR and whack it in there, otherwise you could probably pick up a stock pocket from a wrecker in ur city like i did... i ended up payin $30 for mine which some may say is overpriced but it was made specifically for my car so y not go for stock! matches the cigarette compartment too :)

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1498272
Share on other sites

Funnily enough the guys at JB Hi Fi mentioned that i'd have to source a pocket from the nissan dealer. They did mention that they sold pockets for Toyotas which i believe won't fit. I guess they don't sell the universal one here?

I wonder if those 3 Gauge clusters fit cleanly, or if they require abit of fiddling... my main goal is to make it look stock i guess.

prosman:

Any tips on where to find that GTR Cluster?? I'm assuming their relatively pricey, i.e. 200+? Otherwise where'd you find your dash pocket? I think u bought the exact one that i'm after... looks like an ash tray with a fold down lid?? I wouldn't mind paying $30 for that...

I think i may have to go round to the wrecker...

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1498464
Share on other sites

make your own mate, it will cost you about $10 tops and you can do what ever you like with it.

You can mount your gauges in there, make a custom holder for your cd's, wallet, mobile, loose change about anything really.

Be a little creative and im sure you will come up with plenty of ideas champ.

If all else fails then buy that bit of plastic from the dealer for $60 and be done with it :lol:

Cheers B

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1498610
Share on other sites

Thanks for the input everyone...

I've gone down to Central Car Radio and picked up a JIN Pocket. The pocket itself does not have a flap as mentioned by some of the others, but i'm positive it will provide the best fit so far... it also appears to have been manufactured by nissan...

I'm happy... for now.

Cheers...

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1500265
Share on other sites

Thanks for the input everyone...

I've gone down to Central Car Radio and picked up a JIN Pocket. The pocket itself does not have a flap as mentioned by some of the others, but i'm positive it will provide the best fit so far... it also appears to have been manufactured by nissan...

I'm happy... for now.

Cheers...

the din pocket u need for r33s is the same as in current pulsars, which is $32 from nissan, so i dont see how u got quoted 60, must have been the wrong one.

if u look in the sticky guide on how to install a head unit in this forum, it also says there u need a pulsar pocket.

good luck fitting the one u got anyway!

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1500508
Share on other sites

the din pocket u need for r33s is the same as in current pulsars, which is $32 from nissan, so i dont see how u got quoted 60, must have been the wrong one.

if u look in the sticky guide on how to install a head unit in this forum, it also says there u need a pulsar pocket.

good luck fitting the one u got anyway!

I'll try installing it on the weekend, fingers crossed i guess...

As for the Nissan quote, the customer service rep asked me for my chassis number, and from there she searched for the part # of the JIN Pocket? She mentioned that there were many different JIN Pockets for R33s, something which i have no clue about...

If this pocket doesn't fit, I'll pursue the Pulsar route... The situation is lookin' alot more hopeful now... i thought i was destined to have an ugly HU install....

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1500523
Share on other sites

Nissan parts people love FAST - some people will insist looking up my car even when I explain the part I'm trying to find won't even be listed with my VIN cos it came off another model.

JustJap in sydney sell lots of those DIN pockets/drinkholders. They're about $15-20 and they have the stock ones and generic ones.

Unfortunately they don't have cefiro ones so I've used a piece of fibreglass with a carbon fibre top coat on it to block up the space for now. I will be putting gauges in there eventually :)

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1507237
Share on other sites

I was able to source a DIN pocket which has fitted perfectly into the dash & the mounting holes. Exceptionally happy with the find as I was beginning to get peeved at the massive hole under the HU. I purchased it from Stylin Car Audio on Nepean Hwy... it was 39 bucks...

I'll still need to play with the surround on the HU face... Fibre glass doesn't sound like a bad idea....

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1508614
Share on other sites

ugly head unit installs are the worst! they are something so small that ruins the interior!

when i had my XPLOD HU in my TX5, the sony surround fit perfectly inside the factory larger surround that sat around it...

then i changed to a pioneer, and they're surrond is a lot bigger, and wouldnt fit...the guy was like "ill just leave it off coz it wont fit"

Bullshit! make it fit...so now the pio HU sits a tiny bit more out of the factory surround, but still looks factory, and has the pioneer surround.

hopefully i can get the same result when i put a pioneer in the skyline! and thanks for the info on the pulsar pocket...if it fits perfect and is half the price, thats sweet!

will they ask for a VIN etc if u just say you want the pocket from the pulsar?

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1518400
Share on other sites

yep thats right

the pioneer surround definetly fits and an r33 dash.

at first it seems like it wont, but u gotta get the angle right and fiddle around a bit to get it in, there was no way i was leaving mine off it looks stupid without.

Link to comment
https://www.sau.com.au/forums/topic/82809-din-dilemma/#findComment-1520194
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...