Jump to content
SAU Community

Recommended Posts

What is every-ones opinions on the past and current skyline engine.I for one regard the VQ35 engine as a much more sophisticated engine and am sure it will be a much more powerful power plant to extract HP from. :(

I think the vq35 engine has a lot more potential to make more power

than the rb26 mainly because the vq35 engine is v6 configuration compared to the inline rb26.

They are making about 1800 hp with the vq35 engine in the states an

thats only in early development stages

Link to comment
https://www.sau.com.au/forums/topic/82854-vq35-enquire/#findComment-1503757
Share on other sites

I think the vq35 engine has a lot more potential to make more power

than the rb26 mainly because the vq35 engine is v6 configuration compared to the inline rb26.

They are making about 1800 hp with the vq35 engine in the states an

thats only in early development stages

:)

links? im interested

Link to comment
https://www.sau.com.au/forums/topic/82854-vq35-enquire/#findComment-1504072
Share on other sites

mainly because the vq35 engine is v6 configuration compared to the inline rb26.

You do understand that your point makes absolutely no sense? :P A V-configuration is inferior to a straight configuration: a V is a compromise to try and improve packaging options.

The main reason for "more potential" is in fact the much greater displacement and newer tech.

Lucien.

Link to comment
https://www.sau.com.au/forums/topic/82854-vq35-enquire/#findComment-1504617
Share on other sites

Stock for stock in a standard Nissan (so excluding the 500hp Z-Tune RB26DETT and the stupidly expensive 450hp VQ35DE that Nismo makes for racing) I'd take the VQ35DE.

Same power (approximately), more torque, smoother power delivery, and probably the same weight (if not lighter, due to its all alloy construction, lower componentry count and more compact design).

If you're talking about a base for modification, the RB is a known quantity. People are still developing the VQ, which hasn't really been used in a performance application for that long.

Link to comment
https://www.sau.com.au/forums/topic/82854-vq35-enquire/#findComment-1506441
Share on other sites

Stock for stock in a standard Nissan (so excluding the 500hp Z-Tune RB26DETT and the stupidly expensive 450hp VQ35DE that Nismo makes for racing) I'd take the VQ35DE.

Same power (approximately), more torque, smoother power delivery, and probably the same weight (if not lighter, due to its all alloy construction, lower componentry count and more compact design).

If you're talking about a base for modification, the RB is a known quantity. People are still developing the VQ, which hasn't really been used in a performance application for that long.

I just can't get into the V design.. that has been one thing the GTR has always had an inline 6... V12 i can understand.. (imagine a inline 12.. :D )

None the less the VQ is a good engine.. but I still like the RB more.

Link to comment
https://www.sau.com.au/forums/topic/82854-vq35-enquire/#findComment-1513619
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...