Jump to content
SAU Community

Recommended Posts

Brand new: WORK EMOTION CR KAI

workcrkai.gif

view6.jpg

view5.jpg

- Brand new, can choose 4 colors as shown above

(Order only at the moment)

Available in 4 and 5 studs both 114.3 and 100 PCD

- 16x7.0" = $1,649.00 a set

- 17x7.0" = $1,799.00 a set

- 17x8.0" = $1,899.00 a set

- 17x9.0" = $1,950.00 a set

- 18x7.5" = $2,049.00 a set

- 18x8.5" = $2,149.00 a set

- 18x9.5" = $2,249.00 a set

**NOTE: The prices are only for above 4 colors**

** Landed price in Melbourne, Domestic shipping is extra

** via Container

RAYS Lock nuts:

- $239.00 a set (sent via AIR)

Available in 3 colors> Blue/Red/Black

Raysnut.jpg

post-14653-1123498554.gif

Edited by BT-Revolution
Link to comment
https://www.sau.com.au/forums/topic/83164-work-cr-kai-brand-new-16-17-18/
Share on other sites

can you get miss-matched set? as i'd be looking for the 18" x 9.5" +12 offset (rear) and 18" x 8.5" +20 for the front? also is black an option?

can i get a price with lock nuts and deliver to Qld 4215?

cheers, Matt

  • 2 weeks later...

nemz - No Problem. Just let us know when.

Please also note, that these are shipped via sea so can take around a month to land. A deposit is required, so full payment is not needed upfront.

  • 2 weeks later...
  • 1 month later...
  • 1 month later...
can you get the URAS NS-01 in any other colour, and do they come in 18"?

Only comes in 17" (Silver, Black and Chrome)

Sizes Available:

- 17x8.0" +30 (5x114.3)

- 17x9.0" +30 (5x114.3)

- 17x9.5" +15 (5x114.3)

Please check: http://bt-revolution.com/URAS%20Wheels.htm

is there any custom offset for the honda s2000?

Not sure for this model,

here is the recommended size for S2000

http://www.work-wheels.co.jp/wheels/matchi...k1p-2-honda.htm



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...