Jump to content
SAU Community

Recommended Posts

I think this question is pretty hard to answer! It depends what you are after.

If you put the money you save from buying a GTST instead of a GTR into a GTST you will have a very quick car. GTST's are pretty easy to modify and there are a lot of parts on the market for them now. So I have to say the maintenance costs will be pretty low.

A GTR on the other costs heaps to maintain and performance/standard parts a pretty pricy (Although recently prices have come down sufficiently). Even with the high costs associated with a GTR driving one is an absolute pleasure.

I have a couple of friends that have bought GTST's instead GTR's. One bought a R33 GTST and is building it for drag and the other opted for a R34GTT.

I know having said all this I'm going to cop a pasting from everyone. I personally believe that the decision depends solely on you. It all comes down to what you want and what your budget allows you to have.

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1508367
Share on other sites

It aslo comes down to what you think you can handle I think.

Rember the GTS-T is a street car that you can take to the track.

a GTR is a Race car that you can drive on the street.

Both have there pro's and con's. Personaly after owning a R33 GTS-T for 2 years. I am looking at geting a 32 GTR (in the future) as a weekend car and keep the GTS-T for daily duties.

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1508901
Share on other sites

Hey all, im in this similar delimea in deciding.

The way ive wayed it out is like this

Buying a GTST

Its cheaper to buy and the money ide save on buying a GTST insted of a GTR could be put back into the car to make it faster. BUT when i go to sell the car i wont get as much as i would for a GTR. Advantage - GTST is RWD, so stepping it out etc = :)

GTR - Allot more powerful, and move advanced options. When time comes to sell i will get allot more for it (importing it that is).

BUT my one question comes down to all the GTR drivers out there. Is it possible to step the back out in a GTR, or is it not the same as doing so in a GTST.

That is the one question thats keeping my up at night and tossing and turning in my sleep.

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1510751
Share on other sites

of course it can step out....dont forget its not a full time 4WD car. R32's its easy to remove the switch and have RWD mode only. Also if you have an HKS ETC, Grid Dancer, etc. you can also go RWD mode. Just remember, GTR's arent drift cars. You want a drift car, buy a 180sx or something similar thats cheap.

Diesel, something for you to bare in mind....can you afford it? By that, i dont just mean afford to buy the car itself. If you buy an R32 GTR be prepared for worst case scenario. Think about insurance aswell.

You didnt specify on which GTR or GTST you were after. R32 and R33 GTST have different motors.

For me, GTST was never an option. I chose a GTR....and my pockets are quite light because of it. But as Manage13 said, it is up to the individual. It all depends on what you want it for.

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1510772
Share on other sites

why do people keep saying "MAINTENANCE ON A GTR IS EXPENSIVE"

what do you consider maintenance?

I consider oil, brakes, spark plugs, fluids, tyres... etc.. maintenance.

how is it more expensive on a gtr than a GTST?

an engine rebuild or performance modifications are not Maintenance.

yes they seem to be more on a GTR than GTST.

but to maintain a GTR can't cost more than a GTST.

if you disagree, please state why

all you light pocketed GTR owners should be able to comment here.

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1511570
Share on other sites

why do people keep saying "MAINTENANCE ON A GTR IS EXPENSIVE"

what do you consider maintenance?

I consider oil, brakes, spark plugs, fluids, tyres... etc.. maintenance.

GTST, you have a point. It was a poor choice of words on my behalf.

It's just that when something goes wrong with a GTR it usually always means huge $$$$$. God help you if your car is already modified and you need to replace some parts.

But if you ask any owner of a GTR they will tell you that it's a money pit.

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1511886
Share on other sites

I don't follow what you mean? Do a Pauline Hanson and "please explain!"

its quite simple, nissans goal for the GTR was coming up with a homolgated street vehicle that could be successfully raced with minor modifications. Which they did successfully for many years. I guess after the first few were produced, they realised there was a big demand for them for a street car, and continued to produce many more than would be required to just meet the criteria for the race cars.

The GTS-T was really just designed as a daily passenger vehicle, but they added a few performance bits to sit it in the middle for those that didn't need the "all out" of the GTR.. and probably couldn't afford one.

I think most would be saying that it is the parts on a GTR, and more complex system that is more expensive to fix if something goes wrong.. or just wears out over time.

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1512044
Share on other sites

THe only GTR specific repair I've had to do was have an ATTESSA leak fixed. Everything else (seals, plugs, pumps, rust, rotors) would be just the same as if I'd bought an 89 300ZX/GTSt I say.

That said, if I had an 89 GTSt I wouldn't be stressed about blowing up the engine. I've seen them for sale for $1200 and cheaper. You wouldn't bother rebuilding it, just buy a replacement :P

Having the GTR motor kark it is my biggest worry.

And in my opinion, mainenance is the replacement of consumables only.

If you want to modify your GTR it's dearer due to needing two airpods, two turbos, two dump pipes, etc. That said, I'm not about to replace the intercooler whereas a GTSt driver might want a front mounted IC, so it *kinda* evens out?

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1512202
Share on other sites

If you decide to go a GTS, go something different. Something like a four door.

As said there is no comparison between GTR & GTS. One is so far better that there's no measuring device available to compare them.

If I had the cash... GTR all the way!!

Sava

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1512233
Share on other sites

As said there is no comparison between GTR & GTS. One is so far better that there's no measuring device available to compare them.

Yeh.. and the OTHER is a GTR..

hahahahaha..

As for the intercooler upgrade.... a whole kit that costs you $600 these days is most likely cheaper than the 2 split dump pipes you'd want to get for your GTR.

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1512273
Share on other sites

Just as most have stated, can you afford the upkeep of a GTR - I'm one of those who fall in the catagory of can but can't if that makes sense? In the first 12 months of having my GTR I have thrown about 6-7k into it that was not planned for or worked into my car budget effecting all other budgets and so on... I'm behind the eight ball because of this car. But would not even consider the purchase of either a GTR or GTST - GTR all the way!

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1512297
Share on other sites

GTR will suck you dry... (in terms of money)

my motor died the other day... im now spending 10 Grand i didnt think i was going to spend

they are fun to drive tho, i drift mine everynow and then and they get sideways very easiely and ant that hard to controll.

you can drift any car you want, not only silvias and gtst's

Link to comment
https://www.sau.com.au/forums/topic/83403-gt-r-or-gts-t/#findComment-1512822
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...