Jump to content
SAU Community

Recommended Posts

<_< A few weeks ago at Wakefield, coming out of turn 1, my R33 GTSt produced a massive puff of blue smoke as if some serious problem had occured. Engine was momentarily fluffy so I pulled into the pits. At idle it seemed OK but the air filter box had a big puddle of oil at the bottom. Figured turbo seals had failed so drove gently home and later to Powerplay at Drummoyne.

Could not get the turbo rebuilt - Garrett's said parts were no longer available so, in went a good 2H unit. Air/fuel mixture had been 12:1 at high revs so a GTR fuel pump and regulator went in too. Car now felt seriously strong and boost valve had to be wound back to zero (guage was showing almost 1 bar instead of 0.8 bar previously) - it now gives 0.75 bar at no clicks.

Next time at Wakefield on 4th lap, same spot, same big blue puff of smoke. This time just stomped on it, engine cleared and car ended up doing a couple of mid 11's, so seemed healthy. But there was a catch - at the end of the day the engine was down 2 litres of oil!

Powerplay now does not think it's a turbo problem. Does anyone have any suggestions? The car has done two and a half years of Supersprints but the engine sounds and feels perfect - and does not use oil in normal driving.

Link to comment
https://www.sau.com.au/forums/topic/83589-big-blue-puff-of-smoke/
Share on other sites

get a compression and leak down test done. i had a similar problem, turbo was fine & no oil leaks anywhere. but i was always topping up the oil. turned out the rignglands were shot on all 6 pistons! an engine rebuild is in process at the moment.

not good news, but hope that helps

sam

Could be also that you're getting excessive blowby and the oil/air mixture is being pushed into the turbo via the crankcase ventilation. (Evident by oil in the air box). I highly recommend you invest in catch can kit(s) if you are doing track work.

have you pulled of your intake tube that connect to your throttle body?

check that for a oiliy residue. if so then check if your PCV (positive crank ventalation) hose that connects to your intake also has the same residue in it. if so then check your static compression.

you said that you checked your fuel air ratio? i have had one case where a dribbly injector was over fuelling and washing the bore there for burning oil.

Good luck,

Boz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...